Graduation Project |
The
Name of the
Student |
Supervisor Name |
Choose a material bearings using the Excel program |
Noor A. Ahmed |
Dr. Kahtan K. AlKhazriji
& Dr.
Abbas K. Husain |
Study of the porosity in composite castings |
Ameer mahdi |
Dr. Kahtan K. AlKhazriji
& Dr.
Usama M. Sultan |
Manufacturing of Jominy tester to measure the harden
ability of medium carbon steel |
Saood Mohammed |
Dr.
Ali H. Ataiwi |
Preparation Zirconium powder by electrochemical process
|
Zaynab Ebtihaj |
Dr.
Fadhil A. Chyad |
Preparation of stainless steel powder by chemical
disintegration method |
Ramiz Abdul Minaam |
Dr.
Mohammed S. Hamza |
The
study of factors affecting the mechanical properties of
ceramic materials |
Laith Ali |
Dr.
Mohammed H. Olewi |
The
manufacture of alloys and sessile fusion |
Nada Abdul Nabi |
Dr.
Sahib.M.Al-Safar |
Study the effect of cooling in the circles of the
microstructure of aluminum alloys |
Ammar Ali |
Dr. Sahib.M.Al-Safar |
Effect of reinforce system on mechanical and sound
insulation properties by using natural material
reinforced polymer composites |
Samar Hasan |
Dr. Sohama E. Saleh |
Study the thermal conductivity of the material
overlapping particulate |
kother Salih |
Dr.
Jawad K. Oleiwi |
Effect of an organic polymer quenching media on
microstructure of 6060 Al alloy |
Alia Ayad |
Dr.
Waleed A. Hana |
Effect of alkaline oxide additives on the electrical
break down of ceramic castable |
Sara Habib |
Dr.
Saad B. H. Farid |
Design and manufacturing dies for aluminum pans used in
different scanning colorimeter |
Ruaa Majeed |
Dr.
Alaa H. Ali |
The effect of forming speed on the forming load in
forging processes |
Toqa Abdul Hadi |
Dr.
Alaa H. Ali |
Pallet design spiral using the language of visual basic
-6- |
Afrah Ghazi |
Dr. Laith
Kais Abbas |
Use
the language of visual basic -6- to design reels power
transmission belts for flat |
Walaa Taha |
Dr. Laith
Kais Abbas |
Experimental study of the effect of sintering parameters
on the initial and final porosity of PM products |
Sara Satar |
Dr.
Alaa A. Atiyah |
Investigation of the heat effects on the high Alumina
cement |
Fatemah Husain |
Dr. Hussein
J. Hussein |
Study of friction –stir welding parameters for different
metals |
Hadil Moiad |
Dr.
Farhad M. Othman |
Study of ingot casting obtained from recycled alumina
cans |
Abdullah Wajeh |
Dr.
Farhad M. Othman |
Study of optical and structural properties of powder
deposited on glass |
Ammar Monther |
Dr. Alaa A.
Abdel -Hamead |
Some study the electrical properties of silica in a
manner chemical |
Teba Alaa |
Dr. Alaa A.
Abdel -Hamead |
Investigation of fowler-Nordheim plot behavior of
metallic emitter arrays |
Alaa Jaber |
Dr. Aseel B.
Abdul Hussain |
Application of nano materials |
Esraa Edan |
Dr.
Aseel B. Abdul Hussain |
Test the quality of the local cement product
specifications compared to the kinds of imported cement |
Tamara nabil |
Dr.
Akram R. Jabr |
Epoxy polymer coated metal |
Wahad Ayad |
Dr.
Akram R. Jabr |
Study of corrosion in mud |
Moroj Mohammed |
Dr. Rana A.
Majed |
Effect of corrosion methods on different joining
|
Huda Faiad |
Dr. Rana A.
Majed |
Study the properties of pack cementation coating layers
of inconell , Monell , St.St |
Zahraa Kamal |
Dr. Abdul
Khaliq F. Hmood |
Influence of diffusion annealing on the properties of
coating layers on super alloy at different temperatures |
Dina Salah |
Dr. Abdul
Khaliq F. Hmood |
Choose a material gas turbine blades using the Excel
program |
Duaa basher |
Dr.
Abbas K. Husain |
Choose a material kit using the Excel program |
Rusol Salah |
Dr.
Abbas K. Husain |
Friction welding of stainless steel with copper |
maram Jaafer |
Dr. Emad S.
Abdulkareem |
Friction welding of stainless steel with aluminum |
Ayat Jasim |
Dr. Emad S.
Abdulkareem |
Tensile properties and hardness of Al-alloy cast under
different pouring temperature and speeds |
Marwan Ehsan |
Dr. Usama M.
Sultan |
Simple modeling of mechanical properties for material
selection purposes |
Zina Khalid |
Dr. Usama M.
Sultan |
Study the effect of reaction time on the process of
preparation for the treatment of microwave caramel |
Mafaz Husain |
Dr. Kadhum
M. Shabeeb |
Study the effect of the proportion of the reactants on
the process of preparation for the treatment of
microwave caramel |
Tamara Saadon |
Dr. Kadhum
M. Shabeeb |
The
study of the physical properties of materials based on
polymer overlapped |
Saba Ahmed |
Dr. Mohammed
A. Hussein |
Oil
extracted from different plants using hydrocarbon
solvent |
Sally Saad |
Dr. Mohammed
A. Hussein |
Equilibrium vapor-liquid hydrocarbon materials |
Ali
Ghazi |
Dr. Mohammed
A. Hussein |
Applications of superconductivity bearing
|
Batool Yosif |
Dr. Ayad K.
Hasan |
Numerical model for the determination of the effective
thermal conductivity of composite materials |
Mouj Mahdi |
Dr. Ayad K.
Hasan |
Study of low temperature properties of engineering
materials |
Zahraa Husain |
Dr. Ayad K.
Hasan |
Bucking characteristics for aluminum & silicon matrix
composite material |
Sara Abdul Rasool |
Mohammed K.
Alwan |
Comparison of mechanical properties for each of Arc
welding and Mig. welding |
Masara Mazin |
Majid H. Abdulmajeed |
Study the behavior of the bending of the poly ester
glass fiber reinforced |
Ahmed Ali |
Mina F.
Khdair |
The
study of the mechanical properties of the epoxy resin
reinforced Kevlar and carbon fibers |
Sura Anis |
Raghad U. Abass |
Study quality control system for a particular product |
ramah Riyadh |
Hind B. Ali |
The
study of the mechanical properties of the material
overlapped with the basis of polymer |
Samer Saad |
Aseel M.
Abdullah |
Some study the mechanical properties and thermal hybrid
complexes with the basis of cellulose fiber reinforced
epoxy and ceramic minutes |
Jaafer Sadiq |
Ahmed H. Ali |
Study property hardness of metal-based complexes minutes
reinforced ceramic |
Othman Abdul Hameed |
Sarmd E.
Ibrahim |
Study the effect of adding aluminum oxide on the
characteristics of bending and shock of polymeric
material |
Zohoor Ahmed |
Saad M. Elila |
Additions to study the use of Kevlar fiber to strengthen
the armor |
Maryam Ali |
Kalid K.
Abbas |
Study of the effect of welding parameters on mechanical
properties of weld Al by function St in spot welding |
Dhirgham Adeil |
Hashim Sh.
Niama |
Nonlinear analysis of RC beams repaired by CFRP in
flexure |
Fanar Emad |
Ammar M.
Hasan |
Study the effect of particle size on the properties of
powder coating layer thermally sprayed coatings by flame |
Ali
Haydir |
Ammar R. hasan |
Study the behavior of the corrosion rate of the material
overlapping metal-based |
Zahraa Abdul Redha |
Mervit M.
Hanoos |
Effect of organic inhibitors on the corrosion of copper
alloys |
Sara Abbas |
Hnaa A Smaij |
Study the effect of using different technology circles
on the fatigue resistance of the alloy steel and
alloying Atie type St37 |
Afrah Khalid |
Mnar A.Najim |
Preparation and study of biomaterial overlapped with the
basis of polymer-reinforced ceramic minutes |
Sara Knaan |
Rabab A. Abdul
aziz |
Effect of Ingot area on mechanical properties for Al
alloys |
Mazin Nabih |
Raad S. Ahmed |