The Main Archive Of Department 2017

Back

 

Auditing Committees
16/03/2017
Referring to the book of ministry of higher education and scientific research/ Supervision and Scientific Education Office/ Department of quality assurance and accreditation, order no.60 at 29/1/2017 involved forming special analysis committees related to national ranking, a meeting was done at materials engineering dep hall at UOT 13/3/2017 first meeting for special analysis committee related to national ranking for Iraqi universities quality which headed by prof Dr. Nabiel A.Jadooe from civil engineering and members of:
1. Assist Prof Dr. Suhama E. Salih Materials Eng. Dep.
2. Assist Prof Dr. Abdulkadhim M hassan Mechanical Eng. Dep.
3. Assist Prof Dr. Hussien W. Mashi Mechanical Eng. Dep.
4. Assist Prof Dr. Najim A. Jwaad Oil technology Dep.
5. Assist Prof Dr. Ramzi S. Hameed Oil technology Dep.
6. Assist Prof Dr.Dhuha S. Ahmed Applied Science Dep.
7. Assist Prof Dr. Ahmed S. Abdulameer control Eng. Dep.
8. Assist Prof Dr. Ahmed H. Hameed Architecture Eng. Dep.
9. Lec. Dr. Abduljabbar A.Hinfeesh Electro-mechanical Eng. Dep.
10. Lec. Dr. Khalid F. Sultan Electro-mechanical Eng. Dep.
11. Lec. Dr. Firas F. Said prod. Eng.& Metallurgical Eng. Dep.
12. Assist. Prof. Ahmed A prod. Eng.& Metallurgical Eng. Dep.

Thesis Discussion
16/03/2017
At 13/03/2017 Assist Prof.Dr. Akram R.Jabir academic staff in materials engineering Dep./UOT
Participate in discussion committee of graduate student Sura F. Sabri/ materials Eng. Collage university of Babylon for her thesis:
Effect of natural pigments on the phy sical properties of non-polar polymers
This discussion was done at the discussion hall in materials Eng. Collage university of Babylon were the student gain excellent degree.

Scientific lecture
16/03/2017
At 12/03/2017 and as a part of scientific activities schedule which prepared by materials engineering department, a scientific lecture was held under the title:
Computer applications in materials engineering
Which speech by Assis. Prof. Dr. Abbass K. Hussien the head of general materials engineering branch which involved the computer software to calculate the input materials in metal, ceramic and composite materials and calculate the mechanical properties like (hardness, tension and creep) and compare it with experimental work with an error less than 4%, an input numbers value to select the optimum condition.
A head of this scientific meeting was done by Assis. Prof. Dr. Farhad M. Othman; dean scientific assistance and with member of Assis. Prof. Dr. Laith Q. Abbass; daen management assistance and Assis. Prof. Dr. Aseel B. Abdulhussien; head of Committee on Conferences in department, also some academic staff and graduate students were attendance on Prof Dr. Fadhil A. Jeaad Hall

Papers Assessment
16/03/2017
Assist. Prof. Dr. Akram R. Jabir Academic staff in materials Eng. Dep./UOT was selected as a member in committee of paper assessment and reviewing for national conference titled:
TMREES 17 Conference Series Technology and material’ for renewable energy environment and sustainability.

Volunteer work
05/03/2017
On 03.05.2017 held a Department of Materials Engineering held a volunteer campaign work for students of all academic levels included cleaning and beautifying department including laboratories and external and internal courtyards and classrooms

Participation in a symposium
05/03/2017
Titled, Integrity original value of the university values, a group of the Department of Materials Engineering / Technology University (Assist. Prof. Dr. Abbas Khamas Hussein, Lecturer Dr. Jalal Jamal Dawood, Assist. Prof. Majid Hamid Abdul Majeed, Assist. Lecturer Hashim Sharif Nema) participated in educational seminar hosted by the Iraqi Academy of combat corruption in the integrity Commission under the slogan:
Integrity Commission powers and borders
The seminar was held at the hall of the martyr al-Hakim / University of Baghdad on Tuesday, 02/28/2017 with presence of university presidents and professors from various universities and some of the relevant authorities.

Baghdad Municipality Initiative
05/03/2017
On 02/27/2017 a step worthy of praise and appreciation to the production department at the Directorate of the Municipality of Baghdad, represented by its General Manager Mr. Abdul-Jabbar Khalaf Algzaeriy send vehicle customized to cleaning the Department of Materials Engineering to contribute to wash and clean the interior and exterior courtyards in the department and a distinct effort by the Municipality of workers.

Seminar
05/03/2017
On 02.26.2017 a lecture was presented by Assist. Prof. Dr. Farhad Mohamed Osman the scientific associate of the Department of Materials Engineering titled:
Review of Rapid Prototype Manufacturing
Which focused on the use of process rapid modeling for the manufacture of prototypes or finished products or the number or templates for polymeric, metallic and ceramic, and techniques where described according to input of the manufacturing process whether the material is a liquid or solid or in the form of powder. This will lead to overcome many of the difficulties associated with the production of the usual means. The lecture was presented in the graduate department hall in the presence of some of the professors of the department and graduate students

 

Changing name Postgraduate Hall
05/03/2017
The Postgraduate Hall (PhD) in the Department of Materials Engineering / Technology University was renamed and the associate name of the late Prof. Dr. Fadel Atya Gyad to the Hall of Prof. Dr. Fadel Atya Gyad and under the administrative order 3 h d / 492 on 13.2.2017 and associate with the approval of the President of the University by the oredr of the Secretariat of the Council of the university number m.g / 1/146 on 01.02.2017.

Cooperation
05/03/2017
On 02.27.2017 met Assist. Prof. Dr. Ahmed Mohammed Hassan Al-Ghaban Head of the Department of Materials Engineering (Agency) with a delegation from Municipality of Baghdad consist of:
1. Dr. Eng. Mahmoud Aziz Jabbar / Director of Environment Department at the Municipality of Baghdad
2. Eng. Abdul-Jabbar Kalf Al-Gzaery / director of production department in the Municipality of Baghdad.
They discussed many of the problems related to Municipality of Baghdad with regard to recycle consumed damaged materials and the possibility of Department of Materials Engineering in addressing these problems and provide appropriate solutions through projects for students or opinions of professors and researchers, and discuss a range of measures including the creation of a joint seminar or workshop in the near future to take advantage of common include asking these problems and to listen to the processors and solutions.
The meeting was attended by a group of professors department whom : Assist. Prof. Dr. Aseel Basem Abdul-Hussein, head of the Committee on Conferences and seminars and Luctuer Hashim Nemah Sharif

Department Meeting
27/02/2017
At 21/02/2017 a meeting held in materials engineering department with present of Head of UOT Prof Dr. Ameen D. thamer, important matters were discussed which involve:
1. Work on five-years plan to develop and encourage master to continue to get PhD. degree.
2. Strategic planning to prepare scientific research and publish them in international scientific journals possess impact factor.
3. The selection of UOT to adopt Independence project was a result of their high performance and this give additional responsibility to success this step which is the first in Iraq.
4. Proceeding with independency project require all to work hard to get a good reputation to UOT, and this success need a big collaboration to succeed the scientific institutions knowing that country is crucible of all types, efforts and nations.
5. Enhancement of scientific homes, because the national project need all efforts to reach high level and the best always.
6. Strategic view to build the country, and collaboration in this using higher education and universities.
7. Work with strategy and planning is the key of development and against laziness.
8. The country development and advancing need mechanisms for solutions to any problems in country sections using a solution with scientific researches.
9. Ethics and correction of relationship between peoples to emphasis this country.
10. Sustain the academic staff rights enhances their value and place in society.
11. Follow-up and maintenance of academic staff sites and update them with up to date research to enhance the university ranking.
12. Trust in your success is the base rule of university success to sustainability of scientific procedure.
At the end of meeting Assist Prof Dr. Ahmed M. H. Alghaban a dean of materials engineering Department thank a UOT head for their advice.
Also the dean gives his acknowledgments to academic staff and advise them with some notes about publishing in registered scientific research, update CV’s and commitment to official hours and the timing of lectures, and development of students levels and follow up the work of labs.
Also The meeting was attended by Dean scientific and administrative assistants, heads of branches.

Quality Check
27/02/2017
At view of ministry of higher education and scientific research in checking the university performance in Iraq, Assist. Prof Dr. fadhel Hashim from technique university of middle Euphrates supervised on a committee of performance check, which starting their job in first meeting held in materials engineering dep.at 20/2/2017, were this committee explain their jobs and it will continue in their jobs till finish.

Theses Dissertation
27/02/2017
Assist prof. Dr. Assel B. Abdulhussien one of academic staff in materials Eng. Dep./UOT participate in dissertation Committee of graduate student Hadeel B. M. Redha / polymer and petrochemical Eng. Dep./materials Eng. Dep. At university of Babylon. The theses named” study the frictional behavior of IPEEK composite”

Research Publishing
27/02/2017
The academic staff in materials engineering Dep./UOT; Assist. Lec. Dr. Abbas. K. Hussuen, Laith Q. Abbas & Jamal J. Dawood named:
“Identify the various response optimal factors for metal weld joint geometry”
The paper include study the effect of parameters on geometry of different metal weld joint for Stainless steel 304 and mild steel ASTM A516 Grade70 using GMAW technique. Various response Optimal factors was used to identify optimum parameters for GMAW were three trial parameters were used (welding current, welding speed & welding electrode diameter).

Research Publishing
27/02/2017
Assist.Prof.Dr. Ahmed M.H. Alghaban; materials engineering department dean published four scientific research which is:
First: “Structural, Physical and mechanical properties of titanium carbide reinforced with Nano niobium carbide” which published in American journal for advance physic science.
The research involved the using of powder technology in preparation of a mix of titanium carbide reinforced with Nano niobium carbide to examine structural, physical and mechanical properties. The result shows an increment in properties with addition of nano niobium carbide to base material of titanium carbide.
Second: preparation and study the structure of titanium carbide prepared by powder technology which published in American journal for advance physic science.
The research involves preparation and structural study of titanium carbide using powder technology with superior properties and at low temperature.
Third: preparation and characterization of composite titanium carbide and Nano aluminum oxide.
This research was published in journal of advance applied and natural science. The research involves the study of structural, mechanical of titanium carbide with nano aluminum oxide with different addition which show an increment in mechanical properties of for prepared composite with increment of aluminum oxide up to 4wt%.
Fourth: effect of addition of nano zirconium oxide particles on structural and mechanical properties of titanium carbide.
The research was published in journal of advance applied and natural science, were titanium carbide was prepared by powder technology by adding of nano zirconium oxide. It has been show that the increment of prepared carbide density with addition of nano Zr. Up to 4% then decrease also the mechanical properties increased up to 6wt%.

Visit of University President Assistance for Administrative Affairs

21/02/2017
at 19th of Feb.,2017, the university president assistance for Administrative Affairs prof dr. Sami abu Alnoon visit the materials engineering department to check the proceeding of final examination of first course for 1st grade accompanying with Assist. Prof. Dr. Ahmed M. H. Alghaban material Eng. Dean and his scientific assistance Assist. Prof. Dr. Farhad M.Othman, where the proceeding of exam for day and evening studies was done, also he encourage the students to make more efforts to improve for better, wishing to our dear students success in doing first course exam.

Specialize Course
21/02/2017
At 01/02/2017 solidarity with national criteria for quality and celebrating with national program for universities ranking, materials engineering dep. Collaborate with prod.eng & Metallurgy Dep. at UOT held first specialized course entitled:
“Basic course in Laboratories quality management system according to ISO 17025” as a first stage in reclamation and development program for Materials engineering staff who work in labs to get full benefit of full quality management system.
Assist. Prof Dr. Abdulkhaliq F. hmood; Director of Quality Assurance Division in Prod. Eng. & Metallurgy certain that this course is the first step which reinforce management and technician site for labs. Staff as a part of 5 days’ programs to achieve a specific program to get dependency of labs to serve our university and country.
The participants in this course were 34, and Training certification were given to them.

Patents
21/02/2017
Prof.Dr. Fadhel A. Jead (Allah Bless him), Assist prof Akram R. Jaber and lec.shaymaa J. kareem; staff in Materials eng. Dep./UOT ,got a patent from Central Agency for Standardization and quality control / Ministry of Planning no. 4838 at 31/1/2017 entitled :
Preparation of magnetic Nano fiber using Electro-spinning with cheap materials salts.

Authored a book
21/02/2017
At the beginning of 2017, a Alymama library for printing and published a scientific book entitled installation engineering materials authored by Assist Prof. Dr. Abbas Khamas Hussein, Head of Branch general materials Engineering / Department of Materials Engineering - University of Technology, where the book included seven chapters, the first chapter included a general introduction, The second chapter was titled the equilibrium and Kinematics, while the third chapter entitled the crystal structure, the fourth chapter talked about to the atomic structure, and the fifth chapter talked about the structure of solid materials, Chapter six ensure crystalline defects, Chapter seventh and last chapter talked about phase diagrams.

Workshop
21/02/2017
Dated 15. 1.2017 held a Department of Materials Engineering workshop entitled (recycling engineering materials) in the Hall of Graduate Studies included multiple topics, such as recycling of polymeric materials and delivered by Assist. Prof. Dr. Jawad Kadhim Elwy Head of the Department of Materials Engineering, explaining some of the important points in the classification of plastic materials and how to make a recycling phases which include stages of collection, separation chopping and grinding . The second topic was titled recycling metal materials delivered by Assist Prof. Dr. Farhad Mohamed Osman Scientific Associate of the Department of Materials Engineering in which he discussed some of the concepts and modern methods used and recycling to the private and public sector and some obstacles and ways of treatment. The activities of this workshop were attended by a group of professors in the department in addition to high studies.

Seminar
21/02/2017
Within the scientific activities of the Department of Materials Engineering the committee cultural newsletter in department has organize a weekly schedule of scientific lectures (Seminar). The first lecture, which was held on 8.1.2017 entitled: The concept of progressive materials functionally prepared by Assist Prof. Dr. Alaa Abdul Hassan Attia , Rector for Academic Affairs Assistant in conjunction with the L.Dr. Ahmed Hussein
The lecture addressed the concept of functionally progressive materials, manufacturing methods, engineering applications and the comparison between them and the traditional composite materials and some important research in this area.
The second lecture, which was held on 22/1 under the title: Review of teeth implants applications delivered by Assist. Prof. Dr. Jawad Kadhim Alwey, Head of the Department of Materials Engineering, where he reviewed the history of teeth plantation in addition to the advantage and disadvantage of all types of teeth implants, such as dental amalgam filling and the filling cement, It also a review of alternative solutions to the disadvantages of teeth . And there was addressed to factors on osseointegration of teeth planted in addition to recent research for metal implants

Paper Publication
21/02/2017
Publication of Assist Prof. Dr. Akram Rahim Jaber teaching in the Department of Materials Engineering / Technology University three researches included:
1. Joind research is marked by: Infrastructure and properties of Fright fiber nickel nanoparticles by electric spinning technique
Which was published in the Journal of Advanced Applied Science in 06/02/2016 which included the preparation of Fright fiber nickel nanoparticles at different ratios by using Zinc nitrate hexahydrate, nickel Hydrate Fright, Nonahydride iron nitrate, polyvinyl pyrrolidine and Dimethylformamide. This has been used as materials operational. The crystalline behavior studied of these materials by X-ray powder diffraction (XRD) - Which led to the change of phases nanoparticles from random to frate twirling by depending on the degree of calcination temperature at a temperature of 700 Celsius. Crystal size was calculated by a Shearer formula by 23.75 nm.
2. Joind research is marked by: Fabrication and characterization of polymer electrical conductive from nylon 6 / multi wall carbon nanotubes by electric spinning technique
Which was published in the International Journal of Thin Films Science and Technology on 13.3.2016 , the research included calculation of Electrical conductivity of pure liquid polymer to Nylon 6 and a ratio was obtained of 33.8 × 10-3S / cm, while this percentage increased with the addition of carbon nano-tubes of the liquid polymer, , also the research included the examination of structural membranes prepared by scanning electron microscope (SEM) and calculated the average fiber diameter of nanoparticles and found equal to 140 nm, and increased electrical conductivity of the membranes prepared from pure nylon.
3. Joind research (Assist Prof. Dr. Akram Rahim Jaber, Assist Prof. Dr. Laith Kais Abbas) is marked: Effect of high voltages and data flow velocity on preparation of diameter nanotube by electric spinning technique
Which was published in the Journal of physical sciences and applications in 2016 and the research included use of electric spinning technique to prepare scaffold tissue simulate, biologic polymers, industrial and natural to be used in tissue engineering applications, fluids were prepared from polyvinyl alcohol PVA as biological polymer to manufacture scaffold by electric spinning technique to emulate the ideal shape and size of the fiber spun by changing operational conditions for spinning electric and shedding high voltage of 5-25 kV and a flow rate of the liquid polymer from 0.1 to 10 ml / hr.
4- Joined research was also published is marked by: The study of thermal insulation for the mortar cements and reinforced by nanoparticles powder
By teachers Assist Prof. Dr.Farhad Mohamed Osman, Assist Prof. Dr. Ala Aladdin, engineer Mustafa Mohammed Saleh / Department of Materials Engineering
In the Journal of Emirates Engineering for Research Engineering in number Issue 1 - Volume 21 - December 2016
In this research nano-powders was prepared from oxide ceramic by chemical-thermal spray technology. Have been manufacturing metal unilateral and bilateral oxides from base metal salts which dissolved in water CuSO4 and Ti (SO4) 2 (for the production of titanium oxide) TiO2 (copper oxide) CuO respectively at a spray temperature reached (700 ± 5 ° C) in different mularriet ( 0.10, 1.0 and 1 mol ). The nanoparticle powders were produced used as an additive material for cement mortar in different ratio weight (5.0, 5.2, 5 and 5.7% ) for use in construction applications including buildings packaging.
The results showed that the nanoparticles prepared powders have size granules (7. 55 nm) for titanium oxide and (8.67 nm) for copper oxide with crystalline structures and systems of Tetragonal and Monoclinic respectively. Since the bulk density has increased and thermal conductivity decreased with increase the ratio of nanoparticles powders added and prepared cement mortar has been improved with adding powders of nanoparticles which makes them useful in future applications, especially modern construction applications
5- Joined research was published marked: mechanical and physical properties of carbon nano-tubes with Kevlar fiber reinforced with resin Polyester by teaching (Assist Prof. Dr. Aseel Basem Abdul-Hussein, Assist Prof. Dr. Imad Abdul-Karim Saadi, Marwa Sobhi Atallah) / Department of Materials Engineering in the Iraqi Journal of Physics on 12/2016
In this research it has been studied hardness (Shore D), water absorbency, Fracture strength testing, Impact test and Durability of Fracture at Nano- composites with the basis of polyester unsaturated resin reinforced Kevlar fiber. Samples processed in a manual casting way according to the base of the mixing of different size fractions from polyester unsaturated resin, fiber and carbon nano tube (1, 1.5, 2.0 %). Polyester unsaturated resin was ground reinforced with 3% volume fractions from Kevlar fiber and (0.5 %) carbon nano tube. The study of the properties of water absorbency, hardness (Shore D) and fracture strength. Results showed that the absorbency of water increases with increases volume fractions for fiber with carbon nanotubes , sample (poly ester + 3% fiber Kevlar + 0.5% carbon nanotubes) has a lower absorbency of water. Fracture test, impact test, Hardness test and durability fraction of the sample (poly ester + 3% fiber Kevlar + 0.5% carbon nano-tubes) has the highest value for the composites of nanoparticles.

Paper publication

17/01/2017
The academic staff Assist Prof.Dr. Farhad M. Othman, Assist. Prof. Aalaa A. Abdulhameed and Eng. Noor M. Ali from Materials Engineering Dep./UOT published a paper in Alkhawarizmi Journal named:
Manufacturing and characterization of ternary metallic oxides using thermo-chemical spraying technique as a gas detector.
Vol. 12, No. 4, P.P. 132- 140 (2016)
Abstract:
In this research ternary oxides were prepared using thermo-chemical spraying from nitrate salts of (Sn, Zn & Cd) with (0.1M) concentration and (50:50) weight percent on Si-based n-type (111) plane with and without notches and dimensions of w:20um, depth 7.5 um as a gas detector with different concs:10,50,100,500 ppmy in the air at room temp and connecting with oil industry.
Crystallization and morphology of prepared films has been inspected using XRD, SEM & AFM techniques. The results showed oxide films that prepared from salts of Zn2SnO4 and Cd2SnO4 and the gas sensitivity with scratches on surface was enhanced which make detector proper for low concentration of H2S danger gas in oil industry.

Patent

17/01/2017
Assist Prof. Dr. Ranaa A. Majeed; academic staff in Materials engineering Dep. Got a patent from Central organization for standardization and quality control named:
“Local porcelain rocks and natural cow’s bones for corrosion protection of low carbon steel in oils medias”
This patent a part of Msc. Student from engineering technical college (hyaam R. Atwan) with mutual supervision with Assist. Prof. Dr. Amal S. Mirza.
This patent discusses using nickel coating with local porcelain and nano alumina and cow bone powder for enhancement of corrosion resistance for low carbon steel that used for oil container, the study was made at 60oC, the results show a good protection efficiency.

Scientific upgrade
09/01/2017
A teaching staff in Materials Eng. Department –UOT Assist.prof Dr. Mohammed S. Hamza was upgraded to Prof. stage according to university order no. T E 790 at 27/12/2016.

Training participation
27/12/2016
Participation of Assist Prof. Aseel B. Abdulhussien and Muhaned N. Abdulwahid ; academic staff of Materials Eng. Dep./UOT in Training on video lectures recording using Electronic education which was held in Ibn Sina center for electronic education/ Almustansrya University for the period 21-22/12/2016.

Getting PhD.
27/12/2016
At 20th of Dec.,2016, the lecturer Raad S. Hafidh from Materials Eng. Dep./UOT get PhD in the field of metallurgical Eng. With a mark of a very good, were the discussion has been made at Dep. Of Production and metallurgical Eng. Dep/UOT.

PhD. Discussion
27/12/2016
At 20th of Dec.,2016, PhD. Student was discussed for his theses named” Development of industrial properties of Concrete by addition of Nano Materials”
The dissertation committee include:
1- Prof. Dr. Ali H.Attaiwi Kufa University/Eng. Collage President
2- Assist Prof. Dr. Mohammed M. Kadhum Babylon Univ./ Civil Eng. Dep. Member
3- Assist Prof. Dr. Abbass K.Hussien UOT/Materials Eng. Dep Member
4- Assist Prof. Dr. Ahmed M. Alghaban UOT/Materials Eng. Dep Member
5- Assist Prof. Dr.Alaa A. Abdulhameed UOT/Materials Eng. Dep Member
6- Assist Prof. Dr. Fadhil A. Resan UO Baghdad/ Science collage Supervisor
7- Assist Prof. Dr.Laith K. Abbass UOT/Materials Eng. Dep Supervisor
The thesis was scientifically assessed by Ass. Prof Dr. Jamal S. Abdulameer from UO Mustansirya/Engineering collage, and lingual by Prof Dr. Ryadh K. Ibrahim from UO Baghdad/Languages collage.
The discussion was made at the Higher study hall in Materials engineering Dep., were the committee afford the student with a very good degree.

MSc. Discussion
27/12/2016
At 20th of Dec.,2016, MSc. Student shams Nsaif Jasim was discussed for her theses under the name of “Investigation and properties of trash recycled PET”.
The dissertation committee include:
1- Assist Prof. Dr. Fadil A. Hashim UOT/Materials Eng. Dep President
2- Assist Prof. Dr. Muhsin A. Abdulhussien UO Baghdad/ Eng. Collage Member
3- Assist Prof. Dr. Rana A Majeed UOT/Materials Eng. Dep Member
4- Assist Prof. Dr. Ahmed M. Alghaban UOT/Materials Eng. Dep Supervisor
5- Lec.Dr.Mohammed A. Mohammed UOT/Materials Eng. Dep Supervisor
The thesis was scientifically assessed by Ass. Prof Dr. Emad S. Abbas from UO Baghdad/Engineering collage, and lingual by Ass. Prof Dr. Samir A. Ameen from Mechanical Eng.Dep.in UOT.
The discussion was made at the Higher study hall in Materials engineering Dep., were the committee afford the student with Excellent degree.

Inventions Exhibition
19/12/2016
On 18/12/2016 a group of Teaching in Department of Materials Engineering / University of Technology (Assist. Prof. Dr. Akram Rahim Jaber, Assist. Prof. Dr. Rana Afif Majeed, Assist. Prof. Dr. Aseel Basem Abdul Hussein) participated in an exhibition of scientific inventions, which held by the Ministry of oil for two days 18-19 / 12/2016 on the Oil Cultural Center hall. The exhibition included the participation of 52 inventors from all ministries, universities and state institutions, Department of Materials Engineering- University of Technology participated in three inventors and four inventions won patents for each:
1. Assist. Prof. Dr. Akram Rahim Jaber in partnership with Assist. Prof. Dr. Laith Kais Abbas and engineered Safa Mohammed Mohiuddin.
2. Assist. Prof. Dr. Rana Afif Majeed in partnership with lecturer Dr. Mohammed Abdul-Hussein and Assist. lecturer Heba Anwar
3. Assist. Prof. Dr. Aseel Basem Abdul Hussein in partnership with Assist.Prof. Dr. Emad Abdul-Karim Saadi and Assist. lecturer Reem Alaa Mohammed
4. Assist. Prof. Dr. Rana Afif Majeed in partnership with Assist. Prof. Dr. Muhammad Halil Hafiz and Assist. lecturer Rana Saheb Noor

PhD. Discussion
18/12/2016
On 18.12.2016 there was a discussion of graduate student (PhD) Aseel Hadi Hamza for her thesis tagged:
Investigation of the characteristics of the polyethylene terephthalate PET recycled chemically / waste bottles
The committee of discussion consisted of the following lecturers:
1. Prof. Adnan Jaber Shamkhi Basra University / College of Engineering, head of the committee
2. Assist. Prof. Dr. Raad Mohammed Saleh, Baghdad University / College of Science, member
3. Assist. Prof. Dr. Sabah Hussein Khamas , Middle Technical University/ Engineering Technical College-Baghdad. member
4 - Assist. Prof. Dr. Farhad Mohamed Osman- University of Technology / Department of Materials Engineering, member
5 - Assist. Prof. Dr Emad Saadi Abdul-Karim -University of Technology / Department of Materials Engineering, member
6 - Assist. Prof. Dr. Ahmad Mohammed Hassan - University of Technology / Department of Materials Engineering, supervisor.
7. Assist. Prof. Dr. kazem Muttar Shabib -University of Technology / Department of Materials Engineering, supervisor.

The thesis was evaluated scientifically by Prof. Adnan Nema Abboud Middle Technical University/ Engineering Technical College-Baghdad and linguistically by lecturer Mayada Rahim Issa - Center of The English language / University of Technology.
The discussion took place at postgraduate studies hall in Department of Materials Engineering. The committee awarded the student an excellent degree.

Eulogy
15/12/2016
On 15.12.2016 Department of Materials Engineering at the University of Technology held eulogy council on the soul of the deceased Prof. Dr. Fadel Ateya Jeyad who passed away after a long illness, This was held at Engineering and control systems hall in the presence of Prof. Dr. Amin Douai Thamer president of the University of Technology and gentlemen aides rector scientific and administrative affairs and a number of department heads and employees of the university

Acknowledgements
13/12/2016
On 01/12/2016 got Assist. Prof. Dr. Muhammad Salab Hamza and Assist. prof. Dr. Alaa Aladdin Abdul Hamid; academic staff in the Materials Engineering Department / University of Technology a letter of thanks and appreciation from Prof. Dr. Amin Douai Thamer president of the University of Technology and so distinctive for their efforts in obtaining the patent tagged: (design and manufacture of cold spraying device for the production of coatings are not affected by water and dust).

Scientific conference

13/12/2016
Lecturer Dr. Nevin Jamal Abdel qader; staff member in Materials Engineering Department / University of Technology participate in the Third Annual Scientific Conference - College of Science for girl / Baghdad University for a period of 7-8 / 12/2016, where Dr. Jamal Nevin presented a scientific paper entitled "Study the effect of inhibitor on Aluminum metal matrix composites for corrosion resistance" In one of the conference sessions.

Blood Donation Campaign

13/12/2016
On 08.12.2016 and under the slogan (we coming a Ninawa with our army and crowd and our blood) and meet the Holy reference to the appeal and in support of our armed forces and mobilized popular fighter on the occasion of volunteer work a week the Department of Materials Engineering Department, in collaboration with the Blood Bank of the campaign with blood on Physical Education Hall at the University of donation.

Students participations
13/12/2016
- On 08/12/2016 Department of Materials Engineering ranked fourth at the University of Technology departments in universities Debates program, which was held under the auspices of the Office of the Prime Minister in collaboration with the Organization of (Be) to raise awareness of human development.

Students participations
07/12/2016
On 04/12/2016 the Department of Materials Engineering participated in the first program of its kind in Iraq (Universities Debates) program under the auspices of the Prime Minister's Office that his organization (Be) to raise awareness of human development and in collaboration with the University of Technology, where the program will continue until Thursday 8 / 12/2106 and in conjunction with the volunteer work a week. Where he took part of our department students:
1. Atyaaf Mahdi / 4th grade, polymer Branch.
2. Mariam Abdul Karim / 4th grade, polymer Branch.
3. Karam Thamer / 3rd. grade, General materials branch
Under the supervision of the lecturer Dr. Manar Abdul-Jabbar Najem, also Assist.lec Hiba Anwar and Assist. Lec. Iman Kazim participated from our department within the arbitration committees of mentioned program.

Patent
07/12/2016
(Assist. Prof. Dr. Jawad Kazem Aliwi) Head of Materials Engineering Department got a patent from the Central Agency for Standardization and Quality Control in conjunction with a group of faculty Assist. Prof. Dr. Rana Majeed Afif / Department of Materials Engineering and Eng. Sura Abdul-Zahra mohsen/ Faculty of Engineering University of Babylon entitled:
"Manufacture of bio-composite materials as substitutes for metallic materials susceptible to corrosion which used in Implant"
The patent Discussed manufacturing of composite material and other functionally graded metal pure titanium and hydroxy apatite ceramic with biocompatibility biggest as a substitute to bolts used in Implant to reduce the corrosion problem occurring between the titanium screw and pillar of the bond between the screw and tooth ceramic. composite material was manufactured as a bulk and with five graded layers in the structure of pure titanium (first class) to Hydroxy Apatite pure (fifth layer) to be graded in the functions and homogeneous in composition as powder metallurgy manner.
It used several techniques to diagnose the prepared materials, including X-ray diffraction and electron microscope imaging scanner and energy dispersive spectroscopy.
Examination of corrosion was Conducted + in the solution emulator to the human body at pH 7.4 and a temperature of 37 °C to indicate the behavior of the material within the human body in vitro addition to conducting the biocompatibility of materials prepared examination, the results shows the success of manufactured items as a bio-materials of tests conducted on these materials.

Patent
07/12/2016
Assist. prof. Farhad Mohamed Othman and Assist. Prof. Dr. Alaa Aladdin Abdul Hamid staff in the Department of Materials Engineering / Technology University and Eng. Noor Mohammad Ali were got a patent numbered 4739 dated 9/11/2016 of the Central Organization for Standardization and Quality Control / Ministry of Planning entitled: “Manufacturing Gas intelligent detector of certain oxides trilogy technology developed thermal chemical spraying", where chemical thermal spraying technology was developed using the Spray multi nozzles instead of the normal nozzle and manufacturing gas sprayer detector locally as well as the design and implementation of the first circuit for the manufacture of intelligent detector for the first time in Iraq, characterized by low cost and applicable in the oil industry in support of the country's economy.

Meeting
30/11/2016
the first meeting was held for the teaching staff of Materials Engineering Department for the academic year 2016/2017 in Wednesday's day on 30/11/2016, headed by assistant professor Dean Dr. Jawad Kadhim Alaiwi oversees the meeting in the presence of President of the University Prof. Dr. Amin Douai Thamer and his Assistant for Scientific Affairs and Alumni’s, assistant professor Dr. Alaa Abdul Hassan Attia and all faculty members in the department.
At the beginning of the meeting collage dean welcomed Mr. President of the University and his Assistant for scientific affairs and the attendances thanking everyone for the efforts made by them during the current academic year, hoping to continue the bid to serve the scientific process and that Allah grants to them and to all Iraqis of good and safety with a brief illustrates the most prominent and the most important section achievements during this period. The many topics by Mr. President of the University asked, referring to the positive aspects of the department. Sovereignty has touched on several things, including: -
- Praise the wonderful march through the university external evaluation, which reflects the internal assessment and this is all due to the hard work and efforts by university professors.- The university offers and access to advanced scientific orders depending on the rankings.- Emphasis on the continuation and strengthening of cultural relations with many of the universities of the world, including the US, German, Iranian and Malaysian through memorandums of understanding.- Consolidation of relations and cooperation with all parts of institutions.- Mr. Assistant Scientific touched on the registry in the Google Scholar site and QRCID and registration of all published scientific research and productions of teaching staff signatories mentioned because of its importance in raising the scientific assessment of global rating of UOT.

Authoring a Book

27/11/2016
A scientific Book entitled with “Materials Technology” was authored by Assest.Prof. Dr. Aseel Basim Abdulhussien and lec. Dr. Manar Abdul-Jabbar (Materials engineering staff in UOT), this book include 10 chapters as follows:
Chapter One (optical) materials, Chapter II (electrical materials), Chapter III (visual material), Chapter IV (nanomaterials), Chapter V (ceramic material). Chapter VI (polymeric materials), Chapter VII (Composite materials), Chapter VIII (advanced metallic materials in technology), Chapter IX (bio-materials), Chapter X (hybrid materials). The book was printed in Alnaoor office Press / Baghdad.

Patent
25/11/2016
Each received Assest.Prof. Dr. Mohammed Salaab Hamza, Assest.Prof Dr. Alaa Aladdin Abdul Hamid "staff in the Materials engineering department / University of Technology and Assest.lec.Sinan Salman and Eng. Shatha Kazem patented invention numbered 4734 dated 8.11.2016 issued by the Universal Organization for Standardization and Quality Control / Ministry of Planning tagged: Design and manufacture of cold spraying device for the production of coatings are not affected by water and dust “Super Hydrophobic”.
The benefits of this device are reflected in:
- Preparation of cheap coating.
- The design of the machine in a different way from the traditional cold spraying device because it works in two directions horizontally and vertically, while the traditional spraying device (which is not available in Iraq) works horizontal direction only.
- Work with ceramic and metal powders with the same efficiency.
- Design cold spraying device, which is designed for the first time to comply with the vertical and horizontal spraying.
- Get a Nano coating dismissive of water (hydrophobic coating) through the use of the device in our country.

Eulogy Council
23/11/2016
Dated 23/11/2016 held a Department of Materials Engineering funeral of the deceased late Haj Hussein Mohammed Hammoud, Director of Administration from 9:30 am -11 am in the morning with the presence of Prof. Dr. Amin Douai Thamer president of the University of Technology and his assistance for scientific affairs and Materials Engineering Department Dean and a number of gentlemen heads of departments and Lecturers, engineers and administrators from all sections of the university.

Eulogy Council
23/11/2016
Dated 23/11/2016 held a Department of Materials Engineering funeral of the deceased late Haj Hussein Mohammed Hammoud, Director of Administration from 9:30 am -11 am in the morning with the presence of Prof. Dr. Amin Douai Thamer president of the University of Technology and his assistance for scientific affairs and Materials Engineering Department Dean and a number of gentlemen heads of departments and Lecturers, engineers and administrators from all sections of the university.

Eulogy

15/11/2016
In the name of Allah, the Beneficent, the Merciful
{íÃíÊåÇ ÇáäÝÓ ÇáãØãÆäÉ ۞ ÃÑÌÚí Çáì ÑÈß ÑÇÖíÉ ãÑÖíÉ ۞ ÝÇÏÎáí Ýí ÚÈÇÏí ۞ æÃÏÎáí ÌäÊí}
God Almighty has spoken the truth.
With more sadness and grief mourns the death of the Materials Engineering / university of Technology his deceased Mr. Hussein Mohammed Hamoud/Administrative director of the who dead on 14/11/2016 we ask God Almighty to receive his soul and paradise, and to inspire his family and his beloved with patience and solace.
We All return to Allah.

      Patent
14/11/2016

A patent(4721 dated 27/10/2016) has been award to Dr. Akram Raheen Jaber, dr. Emad Sadii ,dr, Mnar Abdul jabbar department of materials engineering – university of technology and dr. Ahmed Majeed AL-shamayi from the Iraqi center for cancer research and medical genetic / al –Mustansiriya university
This patent is about growing stem cells on prepared tissue as a support to build human artificial organismic use as replacement of damaged and excised organism .

      Publish Research
14/11/2016

The Assistant Prof. Dr. (Akram Raheem Jaber) and The Assistant Prof. Dr.( laith Kaiss Abass) are lecturers in department of materials engineering – university of technology published an article in Advance Engineering and materials sciences journal , USA . The article entitle:
“Fabrication of electro spun Getosan /Nylon 6 nano fibrous membrane toward metal ions removal and antibacterial effect
The researchers deal with :
Nylon 6/Chitosan membranes were fabricated by electro spinning onto a Millipore glass fiber filter to produce nano fibrous filter. Scanning electron microscopy (SEM) and water contact angle (WCA) were done to characterize the produced filter. Filter removal capability (adsorption) for metal ions was investigated for lead nitrate (Pb(NO3)2) and sodium chloride (NaCl). The antibacterial effect of the Nylon 6/Chitosan was investigated for Escherichia coli. Removal optimum values for Pb(NO3)2 and NaCl reached 87% and 75%, respectively. This research demonstrated that Nylon 6/Chitosan nano fibrous membrane has an enormous applicable potential removal for metal ions from aqueous solutions, antibacterial activity reaching 96%, and reasonable inhibition zone against Escherichia coli (E. coli).

.      MSc. Dissertation
14/11/2016

On 13/11/2016 a discussion of MSc. Dissertation entitled “Fabrication and Characterization of Hybrid Laminate Polymer Composites" submitted by the student Saga Akeel Mousa took place in postgraduate studies hall of materials engineering department .
The committee of discussion consisted of the following lecturers:
1. Assist. Pro. Sohamma Esa Salih, materials engineering department / university of technology, head of the committee.
2. Assist. Pro. Dr.Kalid Mourshed Oweyed , materials engineering college / AL-Mustansiriya University, member.
3. Assist. Pro. Dr.Emad Saidi Abed AL- Kareem, materials engineering department / university of technology, member.
4. Assist. Pro. Dr.Akram Raheem Jaber , materials engineering department / university of technology, supervisor.
5. Assist. Pro. Dr. Lath Kais Abbas , materials engineering department / university of technology, supervisor.
At the end of the discussion the student has been awarded excellent degree.

.      MSc. Dissertation
12/11/2016

On 10/11/2016 a discussion of MSc. Dissertation entitled “Fabrication and Characterization of Hybrid Laminate Polymer Composites" submitted by the student Alaa Mohammed Tleyaa  took place in postgraduate studies hall of materials engineering department .

The committee of discussion consisted of the following lecturers:

1.               Assist. Pro. Dr.Farhad Mohammed Othman , materials engineering department / university of technology, head of the committee.

2.               Assist. Pro. Dr.Intesar Jameel Ismaeel , materials engineering college / Bahgdad University college of Dentals , member.

3.              Assist. Pro. Dr.Kadem Mottar Shebeeb , materials engineering department / university of technology, member.

4.              Assist. Pro. Dr. Sohamma Esa Salih , materials engineering department / university of technology, supervisor.

5.              Assist. Pro. Dr. Jowad Kadem Aliwi , materials engineering department / university of technology, supervisor.

At the end of the discussion the student has been awarded  excellent degree.

Publish Research
23/10/2016
The head of department “Assistant Prof. Dr. Jawad K. Oleiwi” published an article in Engineering and technology  journal. The article entitle: Design of Prosthetic Foot From Polymer Materials Reinforced By Carbon Fibers. This article focuses on the Loss of the lower limb can cause loss of mobility. At all places and at all times, efforts have always been made to make up for such a loss. In this work polymer composite materials had been used to manufacture prosthetic foot. Polymer composite materials PMMA:SR/PUR reinforced by carbon fibers (CF) were prepared as suitable material for prosthetic foot then, tensile characteristics were measured and determined. Numerical work included finite element method (ANSYS-15) was used to analyze and evaluate deformation, stress and strain characteristics of a new designed prosthetic foot, which was treated as three-dimensional structure composite polymer material. The experimental and theoretical results were improved that polymer composite materials can be used for this application.

Awards
23/10/2016
In 18/10/2016 Assit. Prof. Dr. Wafa Mahdi Saleh a teaching Staff in the Materials Engineering Department / University of Technology obtained the certificate of appreciation for her efforts in the training and laboratory center and share scientific symposium held at the University of Technology / training and laboratories center tagged "Engineering postgraduate training and its importance in the development of national industries".

MSc. Dissertation

23/10/2016

On 18/10/2016 a discussion of MSc. Dissertation entitled “Fabrication and Characterization of Hybrid Laminate Polymer Composites" submitted by the student Reham R. Abdullah took place in postgraduate studies hall of materials engineering department .

The committee of discussion consisted of the following lecturers:

1.               Assist. Pro. Dr. Laith K. Abbas , materials engineering department / university of technology, head of the committee.

2.               Assist. Pro. Dr. Zoher J. Abdulameer, materials engineering college / Babylon University, member.

3.              Assist. Pro. Dr. Aseel B. Abdulhussain, materials engineering department / university of technology, member.

4.              Assist. Pro. Dr. Fadhul A. Hashim, materials engineering department / university of technology, supervisor.

5.              Assist. Pro. Dr. Mohammad S. Hamzah , materials engineering department / university of technology, supervisor.

At the end of the discussion the student has been awarded Very Good degree.

 

 

 

 

 

 

 

 

 

 

MSc. Dissertation

16/10/2016

On 16/10/2016 a discussion of MSc. Dissertation entitled “erosion wear behavior of composite polymer reinforced basis on carbon nano tubes" submitted by the student Masarah A. Abdulhameed  took place in postgraduate studies hall of materials engineering department .

The committee of discussion consisted of the following lecturers:

1.               Assist. Pro. Dr. Kadhum K. Resin ,  engineering college / Almustansyria university, head of the committee.

2.               Assist. Pro. Dr. Kaduhm M. Shibeeb, materials engineering department / university of technology, member.

3.              Assist. Pro. Dr. Bassam K. Ibrahem, materials engineering department / university of technology, member.

4.              Assist. Pro. Emad S. Abdulkareem, materials engineering department / university of technology, supervisor.

5.              Assist. Pro. Dr. Aseel B. Abdulhussain, materials engineering department / university of technology, supervisor.

At the end of the discussion the student has been awarded Excellence degree.

MSc. Dissertation

12/10/2016

On 06/10/2016, Assistant Prof. Dr. Jawad Kadhim Oleiwi ‘Head of Materials Engineering Department University of Technology’, participated in M.Sc. dissertation discussion at Alkwarizme College of engineering – University of Baghdad   for student Qosy Y. Helail

Symposium

12/10/2016

On 10/10/2016, the department of Materials Engineering hold a symposium about the three branches in the department. The symposium program contains a lecture of head of department in addition to meeting with Administrative assistant of department Assistant Prof. Dr. Jawad Kadhim Oleiwi.

MSc. Dissertation

12/10/2016

On 10/10/2016 a discussion of MSc. Dissertation entitled " Manufacture and study of the properties of the composite materials basically metal " submitted by the student Ban Farhan Dawood  took place in postgraduate studies hall of materials engineering department .

The committee of discussion consisted of the following lecturers:

1.               Assist. Pro. Dr. Mohamad H. Hafed , engineering college / The Iraqi university, head of the committee

2.               Assist. Pro. Dr. Farhad M. Othman, materials engineering department / university of technology, member.

3.              Lec, Dr. Nahedh M. Ali, materials engineering department / university of technology, member.

4.              Assist. Pro. Dr. Rana A. Majed, materials engineering department / university of technology, supervisor.

5.               Assist. Pro. Dr. Wafa M. Saleh, materials engineering department / university of technology, supervisor.

At the end of the discussion the student has been awarded a very good degree.

MSc. Dissertation

12/10/2016

On 06/10/2016 a discussion of MSc. Dissertation entitled “Prepare and guess the properties of nanocomposite polymer for the purposes structural " submitted by the student Masarah A. Abdulhameed  took place in postgraduate studies hall of materials engineering department .

The committee of discussion consisted of the following lecturers:

1.               Assist. Pro. Dr. Akram R. Jabr, materials engineering department / university of technology, head of the committee.

2.               Assist. Pro. Dr. Ali H. Mohammad, engineering college / alnahrain university, member.

3.              Lec,. Dr Mohammed A. Hussein, materials engineering department / university of technology, member.

4.              Assist. Pro. Sohama E. Saleh, materials engineering department / university of technology, supervisor.

5.              Assist. Pro. Dr. Wafa M. Saleh, materials engineering department / university of technology, supervisor.

At the end of the discussion the student has been awarded Excellence degree.

MSc. Dissertation

12/10/2016

On 06/10/2016 a discussion of MSc. Dissertation entitled “manufacturing the Gas reagent of metal oxides trilogy for industrial applications" submitted by the student Noor M. Ali Ahmed took place in postgraduate studies hall of materials engineering department .

The committee of discussion consisted of the following lecturers:

1.               Assist. Pro. Dr. Mohamad S. hamzah, materials engineering department / university of technology, head of the committee.

2.               Assist. Pro. Dr. Alaa K. Mohammad, alkawarizmi engineering college / university of baghdad, member.

3.              Assist. Pro. Dr. Wafa M. Saleh, materials engineering department / university of technology, member.

4.              Assist. Pro. Dr. Farhad M. Othman, materials engineering department / university of technology, supervisor.

5.              Assist. Pro. Dr. Alaa A. Abdel -Hamead, materials engineering department / university of technology, supervisor.

At the end of the discussion the student has been awarded Excellence degree.

Patent
01/10/2016

In 2016-08-15, The Central Organization for Standardization and Quality Control/Ministry of Planning has awarded patent no. 4667 to a group of lecturers of Department of Materials Engineering/University of Technology (Prof. Dr. Fadhil A. Chyad, Asst. Prof. Dr. Saad B. H. Farid, and Lect. Dr. Basma H. Mohammed) entitled:

"Preparation of Nanomaterial from local material (Asphalt) by simple method with advanced applications"

The patent is abstracted by utilization of simple and cheap preparation method; which is the thermal decomposition of cheap and abundant starting material, the Asphalt. Three percentages of Ethanol Alcohol (20,35,50%) has been added to the Asphalt yielded the targeted results. The preparation method followed in this patents signify elevated productivity and high purity.

Happy Eid
13/09/2016
the presidency of the Department of Materials Engineering / Technology University congratulations and blessings to all Academic staff and Associates in the Eid AlAdhah Almobarak ..... And we hope to return it to them and the Iraqi, land and people to live in peace.

Meeting of General Materials Engineering Branch:
07/09/2016

In 04/09/2016, meeting of General Materials Engineering Branch / Materials Engineering Department / University of Technology was held by Dr. Abbas Khammas Hussein (Head of Materials Engineering Branch) with present of Dr. Laith Kais Abbas (Administrative Assistant) and all staff of Materials Engineering Branch, hoping for them good academic year 2016/2017. The meeting included the following points:

1-           Distribution of Teaching loads for Staff.

2-           Setting of Booking of Laboratory.

3-            Updated the CV. For all Academic Staff.

4-           Recording the researches and Patent in the branch.

Patent:

03/09/2016

A group of professors of the Department of Materials Engineering (Assist. Prof. Dr. Akram R. Jabur, Assist. Prof. Dr. Laith K. Abbas, Safa M. Muhi Aldain) got a patent entitled: “Nano Air Filter”, from Ministry of Planning / The Central Organization of Standardization and Quality Control. Patent No. 4651 on 8/8/2016. Electrospinning technique to nylon 6 polymer solution (10%) dissolve in formic acid (99.9% purity) solution in room temperature was done to fabricate filter with nanoscale dimension porosize for air filter application. Nanofibers with (142 nm) average diameter that is distributed in Gaussian porosize distribution of average porosize (285 nm). The mechanical properties obtained from tensile test to the prepare nanofilter is with maximum stress (4.246 Mpa), Max strain (12.77%), elasticity modules of (40 Mpa), (85%) efficiency of the nanofilter to capture and stopped the alumina nanoparticles with average particle size of 50 nm which added to airflow. (SEM) observed the action of the filter which stopped passing nano particles through it. 

The Second Position in Design Day:
03/09/2016

On 01/09/2016 attended Assit. Prof. Jawad Kazem Oliewi a Head of Materials Engineering Department / Agency, Scientific Associate in Department Assit. Prof. Farhad Mohammed Otman, Assit. Prof. Sohama Easa Saleh, Assit. Prof. Saad Badri Hasson Fared and Assit. Prof.Alaa  Alaaaldin Abdul Majid,  the competition of Design Day, that erected in the Electromechanical Engineering Department in collaboration with IREX Organization of  under the auspices of Prof. Dr. Amin Douai Thamer the president of the University of Technology.

The Students (Hassanein Abd Aoun, Sarmad Sharq Nuri, yassamin Thaer) earned the second position in the competition for their research marked:

"Synthesis of Machinable Cement Composite"

 Which was supervised by Assit Prof. Saad Badri Hassoun Fared, a teaching staff in our department, where that principle is to take advantage of the experience of "crack pinning" instead of "crack deflection".

Awards
03/09/2016
On 15/08/2016 a academic staff at Materials Eng. department Assistant Lec. Nada mahdi Farhan got an award for Great efforts in the department, from the Prof. Dr. Amin Daway Thamir ‘President of the University of Technology’.

Beginning the new Academic Year 2016/2017
03/09/2016

 Head of Department / Agency “Assist. Prof. Dr. Jawad Kadhim Oleiwi” congratulates faculty members and all the engineers, technicians and administrative staff in our department marking the start of the new academic year (2016-2017), wishing (Allah) to lift all crisis on our beloved country and wishes them superiority and continuing success in the scientific and practical careers and hoping progress for all staff in their work which will develop beloved Iraq and our University.