Department archive news

Back


Scientific Activities

Published scientific papers achieves 6 in the period from 01.06.2011 up to 01.09.2011 from:

1.-Prof. Dr. Kahtan Al-Kazrajii, Waleed A. Hana, and Osama S. Ahmed; Study the effect of polymeric quenching on wear resistance of eutectic modified Aluminum Silicon alloy.

    The recipient: Arab Organization for Science and Technology.

2. -Assist. Prof. Dr. Alaa A. Ateya for the applied research titled: Cathodic protection of oil pipelines by Aluminum alloy.

      The recipient: Ministry of Oil.

3. Assist. Prof. Dr. Fadel A. Jeyad for the academic titled: Study some physical and mechanical properties of Ceramic_Ceramic fibers     composite.

   The recipient: Ministry of industry.

4. Lecturer Dr. Allaa A. Abdulhamid for the academic research titled: Investigation the annealing temperature on some optical and      structural properties of Alnico films.

The recipient: Ministry of industry.

5. Lecturer Asil M. Abdulla for the research titled: The effect of Al2O3 addition on the mechanical properties of composite materials with the base of saturated polyester reinforced by rigid glass fibers.

The recipient: Ministry of industry.

6. Assist. Prof. Dr. Emad S. Al-Hassani for the academic research titled: Corrosion behavior of Copper-Steel particulate composite.

Assist. Prof. Dr. Fadel A. Jeyad was the head of the committee for the final oral exam of the MSC. researcher  Entesar A. Hamed from the department of physics, Al-Mostansiriya University for the thesis titled: Using Ceramic additive to develop the mechanical properties of modified bentonite.

The discussion committee included:

Assist. Prof. Dr. Fadel A. Jeyad, University of technology, Materials Engineering department, President.

Assist. Prof. Dr. Anwar H. Ali, Al-Mostansiriya University, Department of applied science, member.

Assist. Prof. Dr. Raad S. Sabree, Al-Mostansiriya University, Department of applied science, member.

Assist. Prof. Dr. Fadel A. Ressen, Al-Mostansiriya University, Department of applied science, member.

The final oral exam started at 9 am on Tuesday the 13th of September 2011 in the hall of physical department, Al-Mostansiriya University. The researcher gained a degree of Very Good.

Assist. Prof. Dr. Waleed A. Hana, one of the academic staff at the Materials Engineering department obtained a short term scholarship at University of Fladifya, Jordan for the research titled: Porosity evaluation of sintered powder compact and its effect on some properties of bioactive (Na2O-CaO-SiO2-P2O5) glass Ceramic system.

The academic member at the Materials Engineering department Nahid M. Ali got the PhD degree (Good) from the department of Mechanical Engineering at UOT for his thesis titled:

Study of the response of conduit conveying fluid due to a forced vibration.

 The academic member at the Materials Engineering department Dr. Akram R. Jabour shared the final oral exam of the PhD student Sadeem A. Fadel from the physical department, college of science at the University of Baghdad for his thesis titled: Study the mechanical properties for Aluminum composite using atomization process.  

The discussion committee included:

Prof. Dr. Raad M. Saleh, University of Baghdad, college of science, President.

Prof. Dr. Nader F. Habobee, Al-Mostansiriya University, Department of Educational, member.

Assist. Prof. Dr. Kassem S. Kassem, University of technology, Department of applied science, member.

Assist. Prof. Dr. Akram R. Jabour, University of technology, Materials Engineering department, member.

Assist. Prof.  Dr. Eman M. Naseer, University of Baghdad, college of science, member.

 Prof. Dr. Hareth A. Jaffar, University of Baghdad, college of science, member-supervisor.

Assist. Prof. Dr. Ekram A. Ajjaj, University of Baghdad, college of science, member.

Some faculty members were honored in the Conference of (Nanotechnology and Advanced Materials and their applications)

Some faculty members were honored from the Department of Materials Engineering for their participation in the Conference of (Nanotechnology and Advanced Materials and their applications), which took place on 14/12/2011 in the theater of the University of Technology:
1 - Ass. Prof. Dr. Fadel Ateya Jeyad  a certificate of merit and letter of appreciation from the President of the University.
2 - Dr.  Ahmed Al-Ghaban/ certificate of merit.
3 - Ass. Lecturer Wijdan  Zia Abdul Jalil / certificate of merit.
Date of publication of News: 21/12/2011

Faculty staff contributions
  1.  Two of member of staff (Assist. Prof.  Dr. Alaa Abdulhasan Atiyah and Assist. Prof.  Dr. Emad Al-Hassani) have contributed in a discussion (examination comitee)  of the Master's degree student Abeer Ahmed Shehab / Laser - Mechanical Engineering, conducted at the Institute of Laser for Graduate Studies / University of Baghdad, on Monday day on 25.04.2011 The Commission for discussion consisting of:

 

  1. Prof. Dr. Abdul Hadi Mutashar (Chairman).

  2. Assist. Prof. Dr. Alaa Abdulhasan A metiyah ( a member).

  3. Assist. Prof.  Dr. Emad Al-Hassani (a member).

  4. Prof. Dr. Khalil Ibrahim Hajim (a member / supervisor)

            Student  has got  a very good evaluation.

 2. Assist. Prof.  Dr. Emad Al-Hassani was participate as a member on the discussion Committee of a Master's degree student Ahmed Ali Jawad / Laser - Mechanical Engineering, that conducted at the Institute of Laser for Graduate Studies / University of Baghdad on Tuesday, 24.05.2011.

 The discussion committee consisting of:

  1.  Prof. Dr. Abdul Hadi Mutashar (Chairman).

  2. Assist. Prof.  Dr. Adel Mahmoud Khalil, (a membe).

  3.  Assist. Prof.  Dr. Emad Al-Hassani (a member).

  4. Prof. Dr. Khalil Ibrahim Hajim (a member / supervisor)

             Student  has got  a very good evaluation.

3.    Assist. Prof.  Dr.  Fadel Atiyah chyad  was participate as a member on the discussion Committee of a Master's degree student Mouammeal Mohammad Hanon / Laser - Mechanical Engineering, that conducted at the Institute of Laser for Graduate Studies / University of Baghdad on Tuesday, 25 / 5 /. 2011 .

  1. Assist. Prof. Dr. Hussein Ali Jawad, (chairman).

  2. Assist. Prof.  Dr.  Fadel Atiyah chyad  (a member)

  3. Assist. Prof.  Dr. Adel Mahmoud Khalil, (a member/supervisor).

Student has got a very good evaluation.
Master Student Zina Noori Abdul hameed  Discussion

Zina Noori Abdulhameed has got an (excellent) evaluation for her thesis entitled:

Corrosion Behavior of Some Implant Alloys in Simulated Human Body Environment

The discussion session was held on Thursday morning on 23/6/2011 in the Hall of Graduate Studies / Department of Materials Engineering / University of Technology.

The Committee consisted of the following:

1.     Assist. Prof. Dr. Ali Hussein ATAIWI / University of Technology / Head of Materials Engineering Department   (Chairman).

2.     Assist. Prof. Dr. Emad S. Al-Hassani / University of Technology / Materials Engineering Department (a member).

3.      Dr. Abdul Kareem Mohamed Ali / University of Baghdad / Science of College ( a member).

4.     Prof. Dr. Kahtan K. Al- Khazraji / University of Technology/President of the University of Technology (a member / supervisor).

5.     Assist. Prof.  Dr. Rana A. Majeed/ University of Technology / Materials Engineering Department (a member /Supervisor).

 

Master's thesis Discussion

Noor Sharif Ghafil has got an (excellent) evaluation for her thesis entitled Fabrication and characterization of stepwise functionally graded materials. The discussion session was held on Thursday morning on 9/6/2011 in the Hall of Graduate Studies / Department of Materials Engineering / University of Technology.

The Committee consisted of the following:

1.      Prof. Dr. Kahtan K. Al- Khazraji / University of Technology President of the University of Technology (Chairman).

2.      Prof. Dr. Sommer Mattee David / University of Baghdad / College of Engineering Khwarizmi (a member).

3.       Assist. Prof. Dr. Saad Badri Hassoun Al-Fareed / University of Technology / Materials Engineering Department ( a member).

4.      Assist. Prof. Dr. Ali Hussein ATAIWI / University of Technology / Head of Materials Engineering Department (a member / supervisor).

5.      Assist. Prof.  Dr. Alaa Abdulhasan Atiyah / University of Technology / Materials Engineering Department ( a member /Supervisor).

Master Student Aseel Shaker Mahmood Discussion

Aseel Shaker Mahmood has got an (excellent) evaluation for her thesis entitled:

 Sintering Behavior of Prepared Nano-Sized Ceramic Powders

The discussion session was held on Thursday morning on 21/6/2011 in the Hall of Graduate Studies / Department of Materials Engineering / University of Technology.

The Committee consisted of the following:

1.     Prof. Dr. Mohammed H. Olewi/ University of Technology/ Materials Engineering Department (Chairman).

2.     Assist. Prof. Dr. Hasan O.Hllo / Mamoon College   (a member).

3.      Assist. Prof. Dr. Shehab A. Zeedan / University of Technology / Applied Science Department ( a member).

4.     Assist. Prof. Dr. Fadhil A. Chyad/ University of Technology / Materials Engineering Department (a member / supervisor).

5.     Assist. Prof.  Dr. Saad B. Hasoon/ University of Technology / Materials Engineering Department (a member /Supervisor).

The first PhD. thesis in the Materials Engineering Department

The first PhD. thesis in the Materials Engineering department by researcher Peman S. Ahmed titled "Improving the fatigue characteristics of the trans-tibial prosthetic socket. Approved by the committee of :

Prof. Dr. Mohsen J. Joaij, Al-Nahrain university, college of Engineering, President.

Prof. Dr. Nabil K. Abdulsahib, Baghdad university, AlKawarizmee college of Enginnering, member.

Prof. Dr. Balkees M. Deyaa, University of technology, Department of applied science, member.

Assist. Prof. Dr. Fadel A. Jeyad, University of technology, Materials Engineering department, member.

Prof. Dr. Kahtan Al-Kazrajii, University of technology, Materials Engineering department, supervisor.

Assist. Prof. Dr. Jouad K. Olaiwee, University of technology, Materials Engineering department, supervisor.

The final oral exam started at 9 am on Thursday the 22nd of September 2011 in the post graduate hall at the Materials Engineering department. The assistant rector and the boss of materials engineering department. The researcher gained a degree of Very Good.

Student activities

To promote activities in the department, a lecture entitled (the role of women in the political process) was given by the student Sally Abdel Hussein on 10 April. Hopefully, for the students to continue in such activities, especially in the human rights issue.

Posts

Attended by: A lecture entitled (early detection of breast cancer and how to examination and treatment). Delivered by Dr. Alaa Al-Khuzai of the university clinic

Regular meetings

Head of the Department have met the third class students in department on 04.20.2011. The objective of such meeting is to identify the problems of students directly. As well, the listening to their suggestions for the development of the learning process and to also develops a relationship between them and the faculties.

Scientific Visit

 In scientific activities of the department, an organizing of scientific visit had accomplished for the second year students to the General Company of Plastic Industries. The aim of the visit was to identify and learn about the most important substances used in manufacturing processes and machinery of plastics. The students and a number of teaching staff are:

          1. Dr. Suhama Essa Salih.

          2. Dr. Farhad Mohamed Othman.

          3. Lecturer Hana Arer Smij.

        Date of publication of the news 04.06.2011

A group of Faculty staff have got a Scientific promotions

1.      Dr. Abbas Khammas Hussein from lecturer to assistant professor.

2.       Dr. Laith Qais Abbas from lecturer to assistant professor.

3.      Dr. Akram Rahim Jabur from lecturer to assistant professor.

4.      Hana Arir Smij from Assistant lecturer to lecturer.

The establishment of a scientific conference

For activating, the protocol signed between the Department of Materials Engineering and Laser Institute for Graduate Studies / University of Baghdad, it is decide to hold an associate scientific conference. The conference will discuss many of scientific researches that relate to the materials and Lasers engineering.  The formation of joint committees between the two parties is complete for enabling the establishment of the Conference at the beginning of next year.

  News Date 03/12/2011

Scientific upgrades

Some of faculty staff has scientific upgrades degrees from lecturer to the degree of Assistant Professor, as follows:

Dr. Abd AlKhalaq F. Hamood

Dr. Farhad M. Othman

Dr. Aseel B. Abd - Al-Hussein
Official Delegation

Two members of staff (Dr. Ali Hussein, head of Materials Engineering and Dr. Alaa Abdulhasan Atiyah) are sent to the University of Salahuddin in the province of Irbil from 27 to 29 / 3 / 2011.  The aim of this dispatch was to participate in the talks between the delegation of Freiberg University of Technology / Republic of Germany and the University of Technology / Baghdad and the University of Salahuddin. It was agreed to open a joint master's program between the two sides approached the German side to hold a formal protocol between the Department of Materials Engineering and its counterpart.

Date of publication of the news 04.06.2011
Student Awarding

Two students were honor in our department/ the fourth year by his Excellency the Minister of Youth and Sports for the superiority of their end year project: 

1.      Hadeel Muaid, under the supervision of. Dr. Farhad Mohamed Othman.

2.      Munther Ammar,  under the supervision of. Dr. Alaa Aladin

Date of publication of the news 06.04.2011

Graduation ceremony

Students of the fourth year have celebrated on the approaching of their graduation on Wednesday, 20 April in Petroleum club. Head of Department and a group of faculty attended the celebration. The ceremony included a speech to the students by the head of department.

Honoring a group of faculty

On celebration of science day at April 6, his Excellency, the Minister of Higher Education and Scientific Research, Ali al-Adeeb has honored two of the faculty staff :.

1.         Assistant Professor Dr. Sahib Al-Safar for the best-published book.

2.        Lecturer Sarmad Emad Ibraheem for the best-published paper in outside of Iraq.

Meeting of General Authority

A meeting of the General Authority in the Department of Materials Engineering has been held on Thursday 19/05/2011 at 10 AM in the presence of Dr. Ali Hussein Ataiwi the head of department.

The meeting dealt with matters of scientific and activity of committees and also discussed the status of the laboratories. Meeting also discussed the problems and treatments that a raised during the course of this year.  The head of department listened to some of the proposals pertaining to the educational reality. He also urged to do additional activities that fit with the great development witnessed by the universities. The Head of Department finally refers to the remarkable efforts that spent by all the member of staff to the success of the scientific march and an emphasis on continuing efforts to improve for the better.