 |
The Name of the Researcher |
Research Title |
Journal Vol., Issue |
Year |
Abstract |
|
01 |
Dr. Hussein A.
jaber |
Study the Effect
of Glass and Carbon Fibers on the Firebrick Properties |
Journal of Engineering and Technology |
2017 |
Abstract |
|
02 |
Mohammad K. Alwan |
Bending
Characteristics of Carburized Low Carbon Steel Experimental and
Numerically Study |
Journal
of Babylon University / Engineerinf Science |
2017 |
Abstract |
|
03 |
Dr. Ahmed M. Al-
Ghaban |
Chemical Recycling of Polyethylene Terephthalate (PET) as
Additive for Asphalt |
The
official scientific journal of Salahaddin University |
2016 |
Abstract |
|
Dr.Mohammed A.
Hussein |
|
Shams N.
Almutalabi |
|
04 |
Dr. Suhama E.
Salih |
Fluxural and Impact Properties of PMMA
Nano Composites and PMMA Hybrids Nano Composites Reinforced by
Different Nano Particles materials used In Dental Applications |
The Iraqi
Journal For Mechanical And Material Engineering |
2016 |
Abstract |
|
Dr. Jawad K. Oleiwi |
|
Alaa M. Abd |
|
05 |
Dr. Rana A. Majed |
Effect of
Tempering on Thermal Analysis of AI-Ti-Si Alloy and Its
Composites |
Iraqi
Journal of Physics |
2016 |
Abstract |
|
Dr. Wafaa Mahdi
Salih |
|
Ban Farhan Dawood |
|
06 |
Dr. Farhad M.
Othman |
Manufacturing and
characterization of ternary metallic oxides using
thermo-chemical spraying technique as a gas detector |
AL-Khwarizmi Engineering Joural |
2016 |
Abstract |
|
Alaa A.
Abdulhameed |
|
Noor M. Ali |
|
07 |
Dr. Farhad M.
Othman |
STUDYING THERMAL
INSULATING OF CEMENT MORTAR REINFORCE WITH
CERAMIC NANOPOWDERS |
COE Emirates
Journal for Engineering Research (EJER) |
2016 |
Abstract |
|
Alaa A.
Abdulhameed |
|
Mostafah M. Salih |
|
08 |
Dr. Aseel B.
Al-Zubaidi |
Mechanical and
physical properties of carbon nano tubes with kevlar
fiber reinforced with polyester resin |
Iraqi
Journal of Physics |
2016 |
Abstract |
|
Dr. Emad S.
Abdulkareem |
|
Marwa Subhi
Atallah |
|
09 |
Dr. Suhama E.
Salih |
Investigation of
Hardness and Flexural Proerties of PMMA Nano Composites and PMMA
Hybrids Nano Composites Reinforced by Different Nano Particles
materials used In Dental Applications |
Journal of Engineering and Technology |
2016 |
Abstract |
|
Dr. Jawad K. Oleiwi |
|
Alaa M. Abd |
|
10 |
Dr. Suhama E.
Salih |
effect of Water
Absorpation on the Compressive Strength for
PMMA Nano Composites and PMMA Hybrids Nano Composites Reinforced
by Different Nanoparticles
Used In Dental Applications |
Journal of Engineering and Technology |
2016 |
Abstract |
|
Dr. Jawad K. Oleiwi |
|
Alaa M. Abd |
|
11 |
Ahmed M. Hashim |
Tensile and Fracture
Properties of Coir Fiber Green Composites Bone Plate Fixation |
The
official scientific journal of Salahaddin University |
2016 |
Abstract |
|
K.E. Tanner |
|
Dr. Jawad K. Oleiwi |
|
12 |
Dr. Ahmed M. Al-
Ghaban |
Binary and Ternary
Nanoceramic Coating to Protect CarbonSteel in Artificial
Seawater |
Journal of Engineering and Technology |
2016 |
Abstract |
|
Dr. Rana A. Majed |
|
Duaa A. Abdullah |
|
13 |
Dr. Rana A. Majed |
Chemically Treated
Sacchurum as Reinforced for Polymer Composite |
Al-Qadisiyah
Journal For Engineering Sciences |
2016 |
Abstract |
|
Dr. Sura S. Ahmed |
|
Aseel M. Abdullah |
|
14 |
Dr. Rana A. Majed |
Effect of Heat
Treatment on Corrosion Behavior of AL-4Ti/MgO-SiC Composites |
Journal of Engineering and Technology |
2016 |
Abstract |
|
Dr. Wafaa Mahdi
Salih |
|
15 |
Dr. Jawad K. Oleiwi |
Design of Prosthetic
Foot from Polymer Materials Reinforced
by Carbon Fibers |
Journal of Engineering and Technology |
2016 |
Abstract |
|
Ahmeb N. Hadi |
|
16 |
Dr. Hussein A.
jaber |
Effect of Glass Wool
Addition on Some Properties of Cement Mortar |
Journal of Engineering and Technology |
2016 |
Abstract |
|
17 |
Dr. Jawad K.
Oleiwi |
Physical and
Mechanical Properties Estimation of Ti/HAP Functionally Graded
Material Using Artificial Neural Network |
Journal of Engineering and Technology |
2016 |
Abstract |
|
Dr. Rana Afif
Anaee |
|
Sura A. Muhsin |
|
18 |
Dr. Jawad K.
Oleiwi |
Design
of Prosthetic Foot From Polymer Materials Reinforced By Carbon
Fibers |
Journal of Engineering and Technology |
2016 |
Abstract |
|
Dr. Ahmed N.
hashim |
|
19 |
Dr. Jawad K.
Oleiwi |
Tensile Properties
Distribution of Coir Natural Fiber
Using Weibull Statistics |
Journal of Engineering and Technology |
2016 |
Abstract |
|
Ahmad M. Hashim |
|
20 |
Dr. Jawad K.
Oleiwi |
Tensile and Buckling
of Prosthetic Pylon Made from Hybrid Composites Materials |
Journal of Engineering and Technology |
2016 |
Abstract |
|
Shaymaa Jumaah
Ahmed |
|
21 |
Dr. Jawad K.
Oleiwi |
Study the Effect of
Iron Powder Additives on Mechanical properties of Recycling of
Aluminum Cans Scrap |
Journal of Engineering and Technology |
2016 |
Abstract |
|
Dr. Farhad M.
Othman |
|
Tuka Abdul zahra |
|
22 |
Dr. Laith Q. Abbas |
Modeling of
Carburization Parameters Process for Low Carbon Steel |
Journal of Engineering and Technology |
2016 |
Abstract |
|
Dr. Abbas K.
Husain |
|
Dr. Jamal J.
Dawood |
|
Naden J. Esmail |
|
23 |
Dr. Farhad M.
Othman |
Studying thr effect
of nano additives and coating on some properties of cement
mortar mixes |
Journal of Engineering and Technology |
2016 |
Abstract |
|
Dr. Alaa A.
Abdulhamid |
|
Dr. Sarmad E.
Ibrahim |
|
24 |
Dr. Niveen J.
Abdulkader |
Study Corrosion
Behavior of Alumina Particulate / (AA6061) Aluminum Metal Matrix
Composite In Marine Environment |
Sulaimani
Journal for Engineering Sciences |
2016 |
Abstract |
|
Dr. Payman Sahbah
Ahmed |
|
Mohammed Mahdy
Jabar |
|
25 |
Dr. Rana Afif
Anaee |
Estimation the
Efficiency of Nano Particles Coating on Carbon Steel by Atomization |
Journal of Engineering and Technology |
2016 |
Abstract |
|
Dr. Ahmed M. Al-
Ghaban |
|
Douaa A. Abdullah |
|
26 |
Dr. Alaa Salahaldein |
Effect of risks on
project planning decision |
Journal of Engineering and Technology |
2016 |
Abstract |
|
Dr. Soaud Kh.
Ibraheim |
|
Dr. Alaa A. Qasim
|
|
27 |
Dr. Jawad K.
Oleiwi |
Studying the Tensile
and Buckling for PMMA Reinforced by Jute Fibers for Prosthetic Pylon |
Journal of Engineering and Technology |
2016 |
Abstract |
|
Shaymaa Jumaah
Ahmed |
|
28 |
Lamees S. Faiq |
The Effect of
Ferrite Content on the Thermomechanical and Dielectric Strength Properties of Epoxy Composite |
Journal of Engineering and Technology |
2016 |
Abstract |
|
Zahraa F. Attiyah |
|
29 |
Dr. Aseel B.
Al-Zubaidi |
Wear erosion
subsidized industrial materials epoxy programs behavior and
painting them with the basis of which a natural substance |
Journal of Engineering and Technology |
2016 |
Abstract |
|
30 |
Dr. Mohammad S.
hamzah |
Manufacture thin
films of TiO2, V2O5) high rejection surface water (powder
coating technology |
Journal of Engineering and Technology |
2016 |
Abstract |
|
Dr. Alaa Alaa
Aldiin |
|
Shatha kadhum |
|
31 |
Dr. Alaa Alaa
Aldiin |
Characterization of
Aluminum-Silver Nano Films and Its Effect as Antimicrobial and
Degradation of Organic Compounds |
Journal
of Physical Science and Application |
2016 |
Abstract |
|
32 |
Dr. Hussein A.
jaber |
Fabrication of
Carbon Nanotube Reinforced Al2O3/Cr2O3 Nanocomposites by
Coprecipitation Process |
AL-Khwarizmi Engineering Joural |
2016 |
Abstract |
|
33 |
Dr. Jawad K.
Oleiwi |
Modeling and
analysis of buckling columns overlapped polymeric |
Journal of Engineering and Technology |
2015 |
Abstract |
|
Dr. Emad S.
Abdulkareem |
|
Alaa Abd Mohammad |
|
34 |
Dr. Suhama E.
Salih |
DEVELOPMENT SOME
DESIRED PROPERTIES OF POLYMER BLEND
(PVC-PP) BY ADDING EPDM AND ABS
AS A MODIFIERS POLYMERIC MATERIALS FOR
USING IN THEMEDICAL APPLICATIONS |
The Iraqi
Journal For Mechanical And Material Engineering |
2015 |
Abstract |
|
Dr. Kadhum M.
Shabeeb |
|
Rula F. Hasan |
|
Ammar Mousa Hasan |
|
35 |
Dr. Suhama E.
Salih |
Comparative Study of
Some Properties of Two Groups’ Binary
Polymer Blends Prepared By a Twin-Screw
Extruder |
Journal of Engineering and Technology |
2015 |
Abstract |
|
Dr. Kadhum M.
Shabeeb |
|
Rula F. Hasan |
|
36 |
Dr. Suhama E.
Salih |
Evaluation
Mechanical Properties of Polymer Composites
Reinforced by different Metal Powders |
Journal of Engineering and Technology |
2015 |
Abstract |
|
Safaa Nayyef |
|
Dr. Alyaa H .Abd
Alsalam |
|
Ammar Mousa Hasan |
|
37 |
Dr. Jawad K.
Oleiwi |
Scientific
Investigation of mathematical modeling of the tensile properties
of unsaturated polyester fibers Almqoh glass Alhasirih |
Journal of Engineering and Technology |
2015 |
Abstract |
|
Dr. Emad S.
Abdulkareem |
|
Alaa Abd Mohammad |
|
38 |
Dr. Aseel B.
Al-Zubaidi |
Effect of Nature
Materials Powders on Mechanical and Physical Properties of Glass
Fiber / Epoxy Composite |
Journal of Engineering and Technology |
2015 |
Abstract |
|
Dr. Emad S.
Abdulkareem |
|
Reem Alaa
Mohammad |
|
39 |
Dr. Aseel B.
Al-Zubaidi |
erosion wear
behavior of industrial materials reinforced epoxy resin
composites and its coating with natural based materials |
Journal of Engineering and Technology |
2015 |
Abstract |
|
Dr. Emad S.
Abdulkareem |
|
Reem Alaa
Mohammad |
|
40 |
Dr. Aseel B.
Al-Zubaidi |
Mechanical and
thermal Properties of Cockles Shell Cementing Materials |
Iraqi
Journal of Physics |
2015 |
Abstract |
|
Ragad U. Abass |
|
Ahmed A. Al-Tabbakh |
|
Nazar J.
Abdulridha |
|
41 |
Dr. Jawad K.
Oleiwi |
Experimental and
Numerical Analysis of Bulletproof Armor made from Polymer
Composite Materials |
Journal of Engineering and Technology |
2015 |
Abstract |
|
Dr. Abbas Khammas Hussein |
|
Sura Hameed Ahmed |
|
42 |
Dr. Aseel B.
Al-Zubaidi |
Recycling Carrot
Powder as Mortar for Cement Replacement |
Journal of Engineering and Technology |
2015 |
Abstract |
|
43 |
Dr. Abbas Khammas
Hussein |
Application of Response Surface Methodology for Modelling and
Optimization of Hot Corrosion Rate of Nimonic 75 Coated by Ce-doped
Aluminizing-Titanizing |
Al-Nahrain University, College of Engineering Journal,
Vol:18, No.:2 |
2015 |
Abstract |
|
44 |
Dr. Abbas Khammas
Hussein |
Application of Box-Behnken Method Based ANN-GA to Prediction of
wt.% of Doping Elements for Incoloy 800H Coated by Aluminizing-Chromizing |
Journal of Engineering, Vol:21, No.:9 |
2015 |
Abstract |
|
45 |
Alaa Abd Mohammad |
Study the thermal
properties and water absorbency materials overlapped fortified
nuclei of dates and olives |
Journal
of Iraqi mechanics and materials engineering |
2015 |
Abstract |
|
46 |
Dr. Aseel Basim
Abdulhussain |
Influence of Coating with Some Natural Based materials on the
Erosion Wear Behavior of Glass Fiber Reinforced Epoxy Resin |
AL-Khwarizmi Engineering Joural |
2015 |
Abstract |
|
Dr. Emad S.
Abdulkareem |
|
Reem Alaa Mohamad |
|
47 |
Alaa Abd Mohammad |
Investigation for
tensile and shock materials overlapped reinforced natural
materials |
Journal of Engineering and Technology |
2015 |
Abstract |
|
48 |
Dr. Jawad K.
Oleiwi |
Analytical study of
the theory of full artificial dentures overlapped upper |
Journal of Engineering and Technology |
2015 |
Abstract |
|
Dr. Suhama E.
Salih |
|
Dr. Qahtan A.
Hamad |
|
49 |
Dr. Jawad K.
Oleiwi |
Studyin g the
Tensile Properties and Morphology Test for the Self Cured PMMA
Resin of Prosthetic Complete Denture |
Journal
of Iraqi mechanics and materials engineering |
2015 |
Abstract |
|
Dr. Suhama E.
Salih |
|
Dr. Qahtan A.
Hamad |
|
50 |
Dr. Jawad K.
Oleiwi |
COMPARATIVE STUDY
THE FLEXURAL PROPERTIES AND IMPACT STRENGTH FOR PMMA REINFORCED
BY PARTICLES AND FIBERS FOR PROSTHETIC COMPLETE DENTURE BASE |
Journal
of Iraqi mechanics and materials engineering |
2015 |
Abstract |
|
Dr. Suhama E.
Salih |
|
Dr. Qahtan A.
Hamad |
|
51 |
Dr. Farhad M.
Othman |
Analytical study of
the theory of full artificial dentures overlapped upper |
Iraqi
Journal of Physics |
2015 |
Abstract |
|
Dr. Alaa Alaa
Aldiin |
|
52 |
Dr. Farhad M.
Othman |
Study the effect of
the proportion of zinc: tin on the gaseous reagent properties |
Journal of Engineering and Technology |
2015 |
Abstract |
|
Dr. Alaa Alaa
Aldiin |
|
53 |
Hind B. Ali |
Carbonation of Steel
in Reinforced Concrete in different waters |
Journal of Engineering and Technology No:12,Vol:32 |
2015 |
Abstract |
|
Shathah R. Ahmed |
|
Ali Abdul-Kareem M. |
|
54 |
Dr. Aseel B.
Al-Zubaidi |
Effect of Nature
Materials Powders on Mechanical and Physical Properties of Glass
Fiber / Epoxy Composite |
Journal of Engineering and Technology |
2015 |
Abstract |
|
Dr. Emad S.
Abdulkareem |
|
Reem Alaa Mohamad |
|
55 |
Dr. Aseel B.
Al-Zubaidi |
Mechanical, Thermal
and Wear Characteristics of Polymer Composite Material
Reinforced with Calcium Carbonate Powder |
Journal of Engineering and Technology No:3,Vol:32, Part
B |
2014 |
Abstract |
|
Dr. Ahmed A.
Al-Tabbakh |
|
Hanaa A.
Al-Qaessy |
|
Ragad N.
Al-Kaseey |
|
56 |
Dr. Abbas Khammas
Hussein |
Optimization of
Wear Paramerers in AISI 4340 Steel |
AL-Khwarizmi Engineering Joural
NO:4, VOL: 10 |
2014 |
Abstract |
|
57 |
Dr. Aseel B.
Al-Zubaidi |
Effect of
industrial powder on mechanical properties of glass fiber
reinforced
epoxy composite |
Iraqi Journal of
Physics |
2014 |
Abstract |
|
Dr. Emad S.
Abdulkareem |
|
Reem Alaa Mohamad |
|
58 |
Raghad U. Abass |
A Modeling
Comparison Studies for Thermo-Mechanical and other Properties of
RHDPE and RLDPE Wastes |
Journal of Engineering and Technology No:3,Vol:32, Part
A |
2014 |
Abstract |
|
59 |
Raghad U. Abass |
The Use of New
Techniques in The Management of Waste Plastic by Reuse it in The
Asphalt Mix |
Journal of Engineering and Technology No:10,Vol:32, Part
A |
2014 |
Abstract |
|
60 |
Niveen
J. Abd Alkadir |
Influence of Acidic
and Salt Media on The Corrosion Behavior of Aluminum Matrix
Composites Reinforced by Al2O3 Particles |
Journal of Engineering and Technology No:10,Vol:32, Part
A |
2014 |
Abstract |
|
61 |
Dr. Sohama E.
Saleh |
The
Mechanical and Thermal Properties of Polymer Hybrid
Composite Reinforced by Rice Husk Ash at Different
Conditions |
Journal of Engineering and Technology No:9,Vol:32, Part
A |
2014 |
Abstract |
|
Basma Hashim |
|
Haitham Mahmood
Al-tamimi |
|
62 |
Dr. Sohama E.
Saleh |
The Effect of PVP Addition on the Mechanical Properties
of [84%LLDPE: 15%(( 100- ) %PP: X%PVP): 1%Basalt
Particle] Polymer Blend Composites |
Journal of Engineering and Technology No:3,Vol:32, Part
A |
2014 |
Abstract |
|
Dr. Akram R. Jabr |
|
Tib Adnan |
|
63 |
Dr. Akram R. Jabr |
Bi2-Xhgxsr2-Ybaycacu2o8/Ag Sheath HTSCWires, (Hg, Ba)
Substitution Effect on he Critical Temperature |
Journal of Engineering and Technology No: 14, Vol: 31,
Part A |
2014 |
Abstract |
|
Dr. Matthew
Makdisi |
|
Dr. Mohammed
Mehdi |
|
64 |
Dr. Sohama E.
Saleh |
Comparative Study of the Mechanical Properties of Two Groups
Ternary Polymer Blends Composites |
Journal
of Engineering and Technology No: 7, Vol: 32, Part A |
2014 |
Abstract |
|
Dr. Akram R. Jabr |
|
Tib Adnan |
|
65 |
Dr. Rana A. Majed |
Corrosion Behavior for Al-Cu-Mg Alloy by Addition of SiO2
Particles in Seawater |
Journal
of Engineering and Technology No: 2, Vol: 32, Part A |
2014 |
Abstract |
|
Hnaa A. Smaij |
|
Mervit M. Hanoos |
|
Saja Amer |
|
66 |
Majid H.
Abdulmajeed |
Effect of (50% Isopropanol – 30%Methanol – 17%Xylene)
Mixture on Corrosion Behavior of Pure Al and its Alloys
in Simulated Fuel |
Journal of Engineering and Technology No: 11, Vol: 31,
Part A |
2014 |
Abstract |
|
67 |
Majid H.
Abdulmajeed |
Modeling of Arc Metal Welding Process of Low Carbon
Steel (304) |
Journal of Engineering and Altknulogiana: 11, Vol: 31,
Part A |
2014 |
Abstract |
|
68 |
Majid H.
Abdulmajeed |
Study the spectral properties of Rhodamine dyes mixture
in different ratio dissolved in chloroform |
Journal of Engineering and Altknulogiana: 11, Vol: 31,
Part A |
2014 |
Abstract |
|
69 |
Dr. Abbas K.
Husain |
Computer simulation model using Fuzzy Logic for
predicting Bhrkیat hot corrosion coated in a manner
Alolmna- Slkna immediate modified Aterum T salt fuse
steel |
Journal of Engineering and Altknulogiana: 11, Vol: 31,
Part A |
2014 |
Abstract |
|
70 |
Dr. Abbas K.
Husain |
Type additive effect on some physical and mechanical
properties of carbon fiber and polyester urethane
complexes |
Journal of Engineering and Altknulogiana .15, Vol.31,
Part A |
2014 |
Abstract |
|
71 |
Dr. Jawad K.
Oleiwi |
A Study of Mechanical Properties of Polymethyl
Methacrylate Polymer Reiforced by Silica (SiO2)
Particles |
Journal of Engineering and Technology No.15, Vol.31,
Part A |
2014 |
Abstract |
|
Dr. Farhad M.
Othman |
|
Esraa
Faisal |
|
72 |
Dr. Jawad K.
Oleiwi |
Modeling and Buckling Analysis of Polymeric Composite
Columns |
Journal of Engineering and Technology |
2014 |
Abstract |
|
Dr. Emad S.
Abdulkareem |
|
Alaa A. Mohammed |
|
73 |
Dr. Jawad K.
Oleiwi |
Tensile
and Buckling Analysis of Polymeric Composite Columns |
Basrah
Journal Vol.: 14, No.: 2 |
2014 |
Abstract
|
|
Dr. Emad S.
Abdulkareem |
|
Alaa A. Mohammed |
|
74 |
Dr. Rana A. Majed |
Experimental Study and mathematical modeling for
behavior of Amalgam at Different periods of the filling |
Tikrit Journal for Dental Sciences NO:1,VOL:1 |
2014 |
Abstract
|
|
Hind B. Ali |
|
75 |
Dr. Jawad K.
Oleiwi |
Numerically and Experimentally Studying of Some Mechanical
Properties of The Polyester Matrix Composite Material Reinforced
by Jute Fibers |
Journal
of Engineering and Technology |
2014 |
Abstract |
|
Mohammed K. Alwan |
|
Qahtan A. Hamad |
|
76 |
Dr. Alaa A.
Atiyah |
Fabrication of Ceramic-Metal functionally Graded Materials |
Journal
of Engineering and Technology NO: 3, VOL: 31 |
2013 |
Abstract |
|
Dr. Saad B. H.
Farid |
|
77 |
Dr. Abbas K.
Husain |
Neural Network Modeling of Oxidation Kinetics in Air of
Steel -T21 Alloy coated by Simultaneous Germanium-Doped
Aluminizing-Siliconzing process |
Journal of Engineering and Technology |
2013 |
Abstract |
|
78 |
Dr. Fadhil A.
Chyad |
fracture statistics of porcelain ceramic :The effect of
zirconia addition and sintering temperature |
Journal of Engineering and Technology NO: 6, VOL: 31A |
2013 |
Abstract |
|
79 |
Dr. Fadhil A.
Chyad |
synthesis and studying some mechanical properties of
nanocmposite |
Journal of Engineering and Technology NO:
7, VOL: 31A |
2013 |
Abstract |
|
80 |
Nassier A. Nassir |
ESTIMATION OF LIQUIDUS TEMPERATURE OF DUPLEX AND
AUSTENITIC STAIINLESS STEEL |
Journal of Engineering and Technology NO: 3, VOL: 31 |
2013 |
Abstract |
|
81 |
Dr. Ahmed M.H.
Abdulkadhim Al-Ghaban |
the effect of increasing carbon concentration increasing
on the mechanical properties of TiCx thin films |
AL-Khwarizmi Engineering Joural NO:3,VOL:8 |
2013 |
Abstract |
|
82 |
Dr. Jawad K.
Oleiwi |
Experimental Investigation and Mathematical Modeling of
Unsaturated Polyester Reinforccd by Woven Glass Fibers |
Journal of Engineering and Altknulogiana .3, Vol.32,
Part A |
2013 |
Abstract |
|
Dr. Emad S.
Abdulkareem |
|
Alaa A. Mohammed |
|
83 |
Dr. Rana A. Majed |
Galvanic corrosion of dental alloys in artificial saliva
containing citric acid |
Journal of Engineering and Technology |
2013 |
Abstract |
|
84 |
Dr. Rana A. Majed |
Effect of Uric acid Level on the Corrosion Behavior of
SS 316L and Co-Cr-Mo Used in Implant Applications |
Journal of Engineering and Technology NO: 17, VOL: 31 |
2013 |
Abstract |
|
85 |
Dr. Rana A. Majed |
Experimental and Numerical Study of CO2 Corrosion For
Carbon Steel |
Journal of Engineering and Technology NO: 15, VOL: 31,
partA |
2013 |
Abstract |
|
Dr. Ali H. Jawad |
|
86 |
Dr. Rana A. Majed |
Sodium
silicate and phosphate as Corrosion Inhibitors for Mild Steel in
Simulated Cooling Water System |
Arabian
Journal for Science and Engineering - King Fahd University of
Petroleum and Minerals NO: 12, VOL: 38 |
2013 |
Abstract |
|
87 |
Dr. Alaa A. Abdel
-Hamead |
Study Some Properties of SnO2 Thin Film |
Journal of Engineering and Technology NO: 12, VOL: 31 |
2013 |
Abstract |
|
88 |
Dr. Mohammed S.
Hamza |
FABRICATION OF TIO2V2O5THIN FILM BY powder COATiN |
Journal of Engineering and Technology NO: 16, VOL: 31 |
2013 |
Abstract |
|
Dr. Alaa A. Abdel
-Hamead |
|
89 |
Hind B. Ali |
The effect of strengthening the fruit of the coconut
fibers on the mechanical properties of the material
overlapped with the basis of unsaturated polyester
resins |
Journal of Engineering and Technology NO: 17, VOL: 31 |
2013 |
Abstract |
|
90 |
Dr. Jawad K.
Oleiwi |
Experimental Investigation and Mathematical Modeling of
Unsaturated Polyester Reinforccd by Woven |
Journal of Engineering and Technology |
2012 |
Abstract |
|
Dr. Emad S.
Abdulkareem |
|
91 |
Dr. Jaafer Al
Haydari |
Corrosion Behavior of Copper -Steel Particulate
Composite |
Modern Applied Science Vol.5, No.3 |
2011 |
Abstract |
|
Dr. Emad S.
Abdulkareem |
|
Shelan Areef |
|
92 |
Dr. Waleed A. Hana |
The effect of 5% of ZrO2.Y2O3 on bioactive (Na2O- CaO-
SiO2- P2O5) system |
Journal of King Abdul Aziz University / Saudi Arabia
Volume 22, Issue 1 |
2011 |
Abstract |
|
Dr. Sahib M. Al
Safar |
|
93 |
Dr. Sahib M. Al
Safar |
The effect of temperature and aging heat treatment in
mechanical mechanical properties of materials superposed |
Journal of King Abdul Aziz University / Saudi Arabia
Volume 22, Issue 1 |
2011 |
Abstract |
|
Dr. Naual E.
Abdul latif |
|
94 |
Hind B. Ali |
Study the characteristics of the synthetic membrane
semi-conductor multilayer |
AL-Khwarizmi Engineering Joural Vol. 6, No. 2, PP 93-99 |
2010 |
Abstract |
|
Hnaa A. Smaij |
|
95 |
Dr. Mithal A. Al
Basam |
Material
Selection Techniques by Using Computer |
Journal
of Engineering and Technology Vol.27, No.4 |
2009 |
Abstract |
|
Hind B. Ali |
|
96 |
Hind B. Ali |
The
study of the causes of increasing the proportion of damage in
milk powder and the phenomenon of Altazhr Block potter |
Journal
of Engineering and Technology, Volume 27, Issue 12 |
2009 |
Abstract |
|
97 |
Dr. Rana A. Majed |
Effect of Chloride Ions on the Corrosion Behavior of Al
– Zn Alloy in NaOH Solution at Four Different
Temperatures |
AL-Khwarizmi Engineering Joural Vol.
4, No. 4 |
2009 |
Abstract |
|
Hind B. Ali |
|
Hnaa A. Smaij |
