ت |
اسم البحث |
اسم الباحث / الباحثين |
اسم المجلة |
المجلد |
العدد |
رقم الصفحة |
Impact factor |
Abstract |
1 |
Synthesis, inhibition
effects and quantum chemical studies of a novel coumarin
derivative on the
corrosion of mild steel in a hydrochloric acid solution |
Ayad Z. Mohamed
Khalida F. Al‑Azawi1
Shaimaa B. Al‑Baghdadi |
Chemistry Central Journal |
10 |
23 |
|
2.55 |
The acid corrosion inhibition process of
mild steel in 1 M HCl by 4-[(2-amino-1, 3,
4-thiadiazol-5-yl) methoxy]coumarin (ATC), has been
investigated using weight loss technique and scanning
electron microscopy SEM). ATC was synthesized, and its
chemical structure was elucidated and confirmed using
spectroscopic techniques |
2 |
Improvement of the Fatigue Resistance and Increase Its Life
of Specimens of Naval Brass Alloy Using Laser Shock Wave
Processing |
د.عبدالهادي كاظم |
Journal of Nanoscience and Technology |
1 |
2 |
69–72 |
1.556 |
|
3 |
Enhancement of Solar Cell Performance Based On Porous
Silicon |
د.عبدالهادي كاظم |
Journal of Nanoscience and Technology |
2 |
2 |
73-75 |
1.556 |
|
4 |
Design and Evaluation of Immersed Wideband Non-polarizing
Beam Splitter Using ZEMAX Program and Needle/ Tunneling
Method |
Ali H. Al-Hamdani
Hayfa G. Rashid
Hussein T. Hashim |
International Journal of Scientific & Engineering Research |
4 |
7 |
|
3.8 |
|
5 |
Enhancing a Trombe wall charging and discharging processes
by adding nano-Al2O3 to phase change materials |
Miqdam T Chaichan
Ali H. Al-Hamdani
Adeeb M Kasem |
international journal of science and Engineering research, |
3 |
7 |
|
3.8 |
|
6 |
Theoretical Studies on Electrophilic Aromatic |
Hasan R. Obayes
Khalida F. Al.Azawi
Ali H. Al-Hamadani |
ORIENTAL JOURNAL OF CHEMISTRY |
1 |
32 |
|
0.479 |
|
7 |
Design and Evaluation of C-Band Non-Polarizing Beam
Splitter Plate using ZEMAX |
Ali H. Al-Hamadani
Hayfa G. Rashid
Hussein T. Hashim |
Wulfenia |
2 |
23 |
|
0.267 |
|
8 |
Effect of angle of orientation of flat mirror concentrator
on solar panel system output |
Ali H. Al-Hamadani
Faten Sh. Zain Al-Abdin
Jiinnan H. Ali |
IOSR Journal of Computer Engineering |
1 |
18 |
|
1.213 |
|
9 |
Enhancement of solar cell performance based on porous
silicon |
Ali H. Al-Hamadani
M. Qasim
K.S. Rida |
Journal of Nanoscience and Technology |
2 |
2 |
|
1.556 |
|
10 |
synthesis of aluminum and titanium oxides nanoparticles via
sol-gel method: optimization for the minimum size |
احمد عبد الامير حسين
كاظم عبد حبيتر |
Journal of Nanoscience and Technology |
2 |
1 |
37-39 |
1.556 |
Al2O3 and TiO2 nanoparticles were synthesized using sol-gel
method. The structures of Al2O3 and TiO2 nanoparticles were
investigated using X-ray diffraction (XRD) study. The
morphology of nanoparticles was investigated by scanning
electron microscopy (SEM) analysis. The FE-SEM images showed
that most of the nanoparticles obtained for Al2O3 and TiO2
nanoparticles have spherical shape with a particle size of
14 nm and 43 nm for Al2O3 and TiO2 nanoparticles
respectively. The absorption spectra of Al2O3 and TiO2
nanoparticles suspended in deionized water were recorded at
room temperature using UV-visible spectroscopy. The
absorption spectra show a strong peak at 344 nm and 483 nm
for Al2O3 and TiO2 respectively. The results on absorption
spectra are in good agreement with those investigated by XRD
which confirmed the formation of Al2O3 and TiO2 |
11 |
ultraviolet photodetector based on TIO2
nanopracticles/porous siliconhetrojunction |
عدي نايف محسن
زهراء جميل
كاظم عبد حبيتر |
optik |
|
127 |
2806-2810 |
0.742 |
TiO2nanoparticles (TiO2NPs) were deposited on porous silicon
(PS) by drop casting technique afterprepared TiO2NPs by
pulsed laser ablation in liquid (PLAL) and PS by
photoelectrochemical etching(PECE). The structural and
morphological measurements were investigated the formation
anatase phaseTiO2NPs with size of 17–101 nm and mesoporous
silicon at 14.18 nm average pore diameter. Reflectivityof PS
was decreased after coated with TiO2NPs leading to much
light trap. As a result, successful UVdetector synthesis
with 0.045 A/W resposivity and 1.9 × 1012W−1cm Hz1/2specific
detectivity.
|
13 |
Corrosion Inhibitor for St-37
Alloy by Laser Shock Peening Technique |
اياد زوين
محمد
عبد الهادي كاظم جدران
ورود مهند
شاكر |
Journal of Advanced
electrochemistry |
2 |
1 |
59-56 |
|
This
study aims to reduce the corrosion that occurring in mild
steel (st-37). Laser has been used as inhibitor to reduce
corrosion rate by using Laser shock peening (LSP) technique
for st-37 submerged in hydrochloric acid with concentration
of 1 M and the immersion time of 30 minutes at room
temperature. The corrosion rate was evaluated by two method;
weight loss method and polarization method. The results were
observed that the values of corrosion rate are decreased
after using the laser shock peening from 7.7210 mm/y to
1.0716 mm/y |
14 |
Design High Efficient
Reflectivity of DBR |
حيدر توران مهدي
علي حميد عبد الهادي
وائل ياس ناصر |
المجلة العراقية لليزر |
|
|
|
|
Bragg mirrors consisting of stacks of
dielectric layers with an optical thickness of
quarter wavelength, which are greater importance for
optoelectronic device
applications. The reflectivity can be increased by
increasing the layers of the mirror
until get the required value of it, for example for
mirrors with 4 Bragg layers pairs, a
relative refractive index contrast of 0.275 is
necessary to obtain a reflectivity higher
than 99%, whereas with 8 layer pairs for same
refractive index contrast reflectivity of
99.99 % is obtained. The high reflectivity is purely
caused by multiple-interferences
effects. The best thickness calculated is InAs/InSb with
2.7749e-07 m pair alternating pair and 99% of reflectance.
It can be analysis by using different matrix method such as
transfer matrix method TMM) which is simplest method for
study the characteristic of devices with different
alternating layers.
|
15 |
Preparation of Nanophotonics LiNbO3 thin films and studying
their morphological and structural properties by Sol-Gel
method for waveguide applications |
مكرم عبد المطلب فخري
مروة صباح محسن
ايفان طارق سليم |
International Journal
of Chemical, Molecular, Nuclear, Materials and Metallurgical
Engineering |
10 |
5 |
|
|
|
16 |
Synthesis of Aluminum and Titanium Oxides
Nanoparticles via Sol-Gel Method: Optimization for the
Minimum Size |
احمد عبد الامير حسن
كاظم عبد حبيتر |
Journal of Nanoscience and
Technology |
2 |
1 |
|
|
Al2O3
and TiO2 nanoparticles were synthesized using sol-gel
method. The structures of Al2O3 and TiO2 nanoparticles were
investigated using X-ray diffraction (XRD) study. The
morphology of nanoparticles was investigated by scanning
electron microscopy (SEM) analysis. The FE-SEM images showed
that most of the nanoparticles obtained for Al2O3 and TiO2
nanoparticles have spherical shape with a particle size of
14 nm and 43 nm for Al2O3 and TiO2 nanoparticles
respectively. The absorption spectra of Al2O3 and TiO2
nanoparticles suspended in deionized water were recorded at
room temperature using UV-visible spectroscopy. The
absorption spectra show a strong peak at 344 nm and 483 nm
for Al2O3 and TiO2 respectively. The results on absorption
spectra are in good agreement with those investigated by XRD
which confirmed the formation of Al2O3 and TiO2.
|
17 |
Studying the effect of simultaneous
variation in both of the bias current and feedback strength
on the output dynamics of semiconductor laser with
optoelectronic feedback |
كاظم عبد حبيتر
قيس عبد الستار
حسن غسان عبد |
IJIST |
3 |
2 |
|
|
We report numerically the generation of
spiking in semiconductor laser SL) with an optoelectronic
feedback. The evolution of nonlinear dynamics of
semiconductor lasers with optoelectronic feedback by
changing together two of the control system parameters (i.e.
the variation of the dc bias current of SL and the feedback
strength simultaneously) is investigated. In addition to the
period-doubling scenario to chaos which shows the transition
of nonlinear dynamics from periodic to quasi-periodic, then
to chaotic state and eventually to Mixed-Mode Oscillations (MMOs)
is shown, this paper demonstrated that the optimal selection
of system parameters can eliminate the generated chaos or
exploiting the chaos benefits. |
18 |
Preparation and Characterization Study of
ZnS Thin Films with Different Substrate Temperatures |
كاظم عبد حبيتر |
Engineering and
technology Journal |
34 |
1 |
|
|
Zinc sulfide (ZnS) thin films were deposited
on a glass and n-type Silicon wafer substrates at
temperature range from 50 - 200 C o
using pulsed
laser deposition (PLD) technique. The structural,
morphological, optical and electrical properties of the
films have been investigated. The XRD analyses indicate that
ZnS films have zinc blende structures with plane (111
)preferential orientation, whereas the diffraction patterns
sharpen with the increase in substrate temperatures. The
Atomic Force Microscopy (AFM) Images shows the particle size
and surface roughness of the deposited ZnS thin film at
substrate temperature 50 and 150 Co
were about |
|
|
|
|
|
|
|
|
|