The Main activities of the Department for 2015

Back


General Administration Meeting 

The president of University of Technology Dr. Amin Daway held a general Administration meeting for Mechanical Engineering Department at 9:30 AM on Sunday 5/10/2015 at Dr.Muneer AL Mudhafar Hall with the attendance of Mechanical Department Head Dr. Moyedd Razooki Hasan and the members of general Professors of the department. Where the University president discussed the preparation for the finals, he noted the great role for Mechanical Engineering department as the oldest and the most important departments in the university, Moreover, he considered Mechanical Engineering Department one of the main scientific & Cultural foundations of the university. He expressed his gratitude with the continuous development of the department. At the end of the meeting he listened to opinions, suggestions, and problems of the professors of the department

 

Publishing a book for our teaching staff in the

 Lambert Academic Publishing

Lecture Dr. Ahmed Abdulnabi Imran publishing a book in the Lambert Academic Publishing entitled:

Induced Flow for ventilation and cooling by solar chimney

 
A Professor from the Mechanical Engineering Department earns a patent

The assistant prof Dr. Ahmed Nayef Al-Khazraji earned a patent named

A new method to improve the surfaces of composite polymer materials

 

Seminar

Under the patronage of the President of the University of Technology Prof. Dr. Amin Daway Thamer the  quality and performance assurance department in the university set up  in collaboration with the university team (ABET) in the Department of Minerals and production / Industrial Engineering in Engineering Branch on Monday, June 29, 2015 a seminar on:

Self-study report, challenges and constraints

According to the standards of Accreditation Council for engineering and technology programs (ABET)

The seminar was held at the Department of Control and Systems engineering, attended the seminar Asst. Prof. Dr. Moyed Rezouki Hassan, head of Department of Mechanical Engineering and Associate Administrator of the Department Dr. Hatem Falah and Associate Scientific Department Dr. Qasim Abbas Atiya and Director of Quality Division in Section Lecturer Dr. Nibras Mohammed Mahdi and a number of faculty members in the department.the first speech was delivered by lecturer Amjad Barzan Abd al-Ghafur, and delivered the second lecture Dr. Mehdi Minshid Shallal, as President of the University and listened to the most important problems and proposals of Gentlemen.

 

The president of the university awards some faculty members in the mechanical engineering department

Under the kind attention of the president of the university Prof. Dr. Amin Daway Thamir a ceremony was held on Wednesday 10/6/2015 to award some faculty members and students in the university and the president praised the role of the university in supporting development of Iraq. The awarded faculty members included the scientific deputy head of the department lecturer Dr. Qassim Abbass Atiya and the president of the General Mechanics Branch Dr. Sadeq Jaafer Aziz and Dr. Sameer Ali Amin and Dr. Ahmed Nayyef, also many graduate student who finished their study in the designated time frame were awarded and those student are PhD student Walla Musa Hashim and MSc students Ali Hussein Alwan and Thamir Amoori Hashim. The ceremony was attended by the heads of departments. At the end of the ceremony the president thanked everyone and gave the university shield to the faculty and students.

Honoring Ceremony

Under the patronage of the President of the University of Technology Prof. Dr. Amin Daway Thamer a ceremony has been set up to honor the retiring faculty members in the Department of Mechanical Engineering (Prof. Dr. Asem Hamid Yusuf and Lecturer Abdul Karim Salman Abdul Karim) on Tuesday, 16/6 / 2015 at exactly twelve o'clock noon and half at D.munir Muzaffar hall. Also,  to honor the following faculty members for scientific upgrade:

Dr. Hassan Mohammed Alwan                   Dr. Sadeq Huddein Baki                Dr. Ammar Salim

Dr. Ghazi Faisal Salloum                                 Lec. Qahtan Adnan Abbass          Dr. Ali Lafta

Asst. Lec. Norah Saleh Ekab                         Asst. Lec. Ali Hussein Alwan        Asst. Lec. Ahmed Hussein  

Asst. Lec. Ali Jabbar Dawood

the president of the university also delivered a speech and praised the great effort of the teaching staff and gentlemen honored through many years of hard work left a clear imprint in the march of the university and department, also delivered a Dr. Imad Nateq Abdul Wahab and Dr. Sadeq Jaafer Aziz their speeches about the retiree explaining scientific careers and their resumes and their performance in the department and that they had assumed positions in the university during the period of employment, then gave the President of the Department of Mechanical Engineering, Dr. Moyed Rezouki his speech in which he described the retiree and wished them a sense of longevity and safety, at the end of the ceremony, President of the University presented the University Shield to lecturers retiring, was also presented certificates of appreciation to the rest of the honorees by Dr. Qassim Abbas the and Dr. Shaker, the head of the promotion committee.

First Exhibition Design Day

  On Monday morning 17, may, 2015. Preparation started on Kindi Hall at Electromechanical Engineering Department. Where University of Technology held under the care of its presidents Dr. Ameen Daway with cooperation of International Research & Exchanges Board (IERX) its First Exhibition Design Day. This event considered one of the greatest events in which work on raising the academic & scientific levels. Also, supply labor market with qualified researchers, engineers, and professors. Opening ceremony attended by president and his two assistants as well as the head of Mechanical Engineering Department Dr. Moyed Razooki. Moreover, many heads engineering Departments of the university and Engineers attended this event. Excellent students from the university participated in this event where they showed their designs.   Also, representative of IREX Dr. Laurie Mason was there as well. The opening ceremony started with the speech of the president of the university where he announced that this day is the start of the continuous cooperation with global & scientific Institutions. He emphasized on developing education level after the massive gap before 2003 where the science was not in decent levels. He clarified that IREX has been great success with the University of Technology because of the university hard workers professors and students. The start of this kind of event was in 2007-2008 where five professors participated at that time whereas; now 65 professors  in 2014-2015 participated in this event which is great evidence on the success of learning path at university of technology. Representative of IREX was pleased with the concentration on design course because it considered the language of the engineer, and to prepare students to be creative in design field for future. Also, she encouraged the cooperation among professors, students, and labor market to have a positive influence on the future. The exhibition started by browsing students design from all the departments and Mechanical Engineering departments. Also, students of forth stage for Mechanical Engineering departments participated as well where the designs were two types; first graduating projects where professors supervised the students while doing it. The other type was designs from student’s creation and their own ideas with minor supervision from design professors, which they were great help for the students.  All the attendant people were pleased and the participated designs were evaluated by a committee from each department. The committee of mechanical engineering department consists of head of the department, General Supervisor for Educational Guidance, and professors of design course. The results of evaluation were the first place was taken by students of Mechanical Engineering and the second place was taken by students of building & construction Engineering and the third place was taken by students of chemical engineering. 

Aircraft Engineering Branch trip to the Iraqi Airways

A number of students and faculty members of the mechanical engineering department- Aircraft Engineering Branch headed by Prof. Dr. Arkan Altaei visited the Iraqi Airways office in a unique scientific tour to learn the techniques being used in aircraft maintenance and enrich the students with the practical experience. The group was toured by Mr. Hussein Ali Faleh Al-Tememi, Manager of the Training Center in the Iraqi Airways who gave a lecture about the latest techniques in aircrafts besides the importance of the human safety. After that, Mr. Al-Tememi toured the group into the maintenance workshops where the students met several aircraft engineers and benefited from their practical experience. At the end of the tour the faculty and students of the aircraft branch thanked Mr. Al-Tememi and his staff for their help and support for serving our beloved country.

Our Crowed Our Proud

In response to the calling of the Supreme High Reference with proper guidance of the minister of higher education and scientific research, and under the care of the president of University of Technology. Head of Mechanical Engineer and number of faculty staff members participated in Training Course titled “We all crowed for Iraq” to respond to the call to defend our valuable country.

Awarding Faculty Members in Mechanical Engineering Department 

Under the care of the president of the university of technology Prof. Dr. Amin Daway Thamir a celebration was held to award several faculty members and students and the president gave a speech about this occasion and praised the university role in pushing the country forward, then several faculty members were awarded including the president of the Aircraft Engineering Branch Prof. Dr. Arkan Khillkhal for being named as the best faculty in the department. Also, Prof. Dr. Shaker Sekran and Prof Dr. Dhafir Alfattal were awarded besides several graduate student who graduated on time including Associate lecturers Ahmed Hussein Mola, Ali Hasan Alwan  and Noorah Saleh Ekab. The celebration was attended by several faculty members and employees. At the end of the celebration the president thanked everyone who made this celebration possible.

The president of the University of Technology opens the renewable energy and theory of vehicles laboratories

The president of the University of Technology Professor Dr. Amin Daway Thamir and the scientific assistant for the president of the university Associate Professor Dr. Wisam Kadhim Hamdan opened the renewable energy and the theory of vehicles laboratories in the mechanical engineering department, building B, on the 14th of April 2015 with the presence of associate Professor Dr. Moyed Razooki  Hasan, the head of department, and the labs manager Associate Professor Dr. Nabeel Noor with the presence of  several faculty members and lab engineers. The president of the university thanked all for the efforts paid to raise the department scientific level and hence, our students scientific capabilities.

Thesis Defense for Mahmood Shaker Nema

According to the recommendation of the postgraduate study committee and the certification of the department meeting on 5/4/2015, it was decided to create the following thesis defense committee for the MS student (Mahmood Shaker Nema), specialized in thermofluids, for his thesis:

((Constitutive Modeling Of Fiber - Reinforced Elastomeric Composites))

No.

Name

Title

Specialization

Place of Work

 

1

Dr. Shaker Sekran Hasan

Professor

Applied Mechanics- Tribology

University of Technology, Mechanical Engineering Department

Head

2

Dr.Jumaa Selman Jeyad

Assistant professor

Applied Mechanics/Stress analysis

University of Almostnasiriya/ Mecanical engineering department

Member

3

Dr. Sadeq Jaafer Aziz

Lecturer

Production Engieering

University of Technology, Mechanical Engineering Department

Member

4

Dr. Mohsen Noori Hamzah

Assistant Professor

Applied Mechanics / Stress analysis

University of Technology, Mechanical Engineering Department

Adviser

The plagiarism proofing was made and according to the plagiarism committee report on 1/4/2015. The language adviser is Dr. Arkan Khilkhal Hussein. The date of the defense is Monday,14/6/2015 9:00 AM at Dr. Jawameer Hall in Mechanical Engineering Department.

University participation in the energy efficiency fair

UOT participated in the energy efficiency and electricity fair which was held in the Ministry of Planning on 21/5/2015 which was the worlds’ day of energy. Mechanical Engineering Department participants are Dr. Hussein Waheeb Mashi and Mr. Faleh Hasan Abd, then the minister of planning Dr. Salman Ali Aljumaili gave an opening speech and welcomed the attendee and described the ministry projects and accomplishments at the current time. Afterwards, Mr. Musab Almodares, the representative of the minister of electricity gave a speech about the facts of electricity in Iraq and the need of more energy and emphasized the importance of reducing the usage of electricity for all government buildings, afterwards he opened the fair where many companies displayed their products and the tools they use for reducing electricity usage.

A Professor from Mechanical Engineering Department Join the Team of scientific Evaluators in Famous & Decent Journal

Dr. Mukdham Tarek Jejahn from Mechanical Engineering Department joined the team of evaluators in the journal “Energy and Building” which is issued by “Elsevier” Organization. Knowing that this journal has an impact factor of 2.465 for 2014 and 3.076 for the past five years according to Thompson Reuters. This journal considered to be one of the developed and important journals in researches in energy buildings.
Two Papers from Mechanical Engineering Department 
Dr. Mukhdam Tarek Jehjan & Mr. Kahleel Ibrahem Abbass are two professors in Mechanical Engineering Department at University of Technology. They published a paper together titled “Improved thermal storage in Tromp wall using variable- phase material “in International Journal for developed research in science, Engineering, and Technology which is issued in India and considered one of the sophisticated journal with an impact factor of 1.918. This paper talks about scientific study which has been built a Tromp wall from local simple materials that is available with afforded prices. Adding to the wall Wax Albrafina as a variable phase to increase thermal storage of the wall. Experiments have been done during Baghdad winter in-between 2014-2015. Study showed that it is possible to use this wall by researchers to warm Iraqis houses during winter.

Two Papers from Mechanical Engineering Department

Dr. Mukhdam Tarek Jehjan & Mr. Kahleel Ibrahem Abbass are two professors in Mechanical Engineering Department at University of Technology. They published a paper together titled “Improved thermal storage in Tromp wall using variable- phase material “in International Journal for developed research in science, Engineering, and Technology which is issued in India and considered one of the sophisticated journal with an impact factor of 1.918. This paper talks about scientific study which has been built a Tromp wall from local simple materials that is available with afforded prices. Adding to the wall Wax Albrafina as a variable phase to increase thermal storage of the wall. Experiments have been done during Baghdad winter in-between 2014-2015. Study showed that it is possible to use this wall by researchers to warm Iraqis houses during winter.

University of Technology celebrates the birth of Amir Almomeneen Ali bin AbiTaleb (peace be upon him)

Under the title:

The saying of Ali bin AbiTaleb- Oh Malek! People are two types: Either a brother in religion or similar in creation…

"This statement must be framed and hanged in all organizations and it is a statement humanity must spread.", Kofi Annan, Former Secretary General of the United Nations

Under the kind attention of the president of the University of Technology prof. Dr. Amin Daway Thamir, the University of Technology in cooperation with the Holy Abbasiya Shrine Administration held a central ceremony to remember the birth of the Amir Al Momeneen Ali bin Abi Taleb (peace be upon him). Sheikh Hussein Al Yassin attended the ceremony in addition to the head of the Mechanical Engineering Department Assist Prof Dr. Moyed Razooki Hasan and a number of faculty members and students from the Mechanical Eng. department. The ceremony was held at the University Theatre and Hall at 9:30 AM on Sunday 3/5/2015.

 

Air Conditioning and Refrigeration Branch Held an Engineering Seminar

Under the kind attention of the president of the University of Technology Prof. Dr. Amin Daway Thamir the mechanical engineering department/ air conditioning and refrigeration branch held the student engineering seminar entitled:

“The Iraqi seminar for refrigeration and its importance in the design and performance of cooling systems”

At Dr. Muneer Hall at 9:00 AM Monday 20/4/2015. Under the supervision of the head of the mechanical engineering department Dr. Moyed Razooki Hasan. The representative of the president of the university Dr. Sami Abu Alnoon the vice president of the university for administrative affairs and Dr. Wisam Hamdan the vice president of the university for scientific affairs also attended the seminar. The opening started with verses of the Holy Quran and Surat Alfatiha upon our Iraqi Martyrs. Afterwards, the representative of the president of the university gave his opening speech followed by the speech of the president of the branch of cooling and refrigeration clarifying the goals on the latest techs in cooling and refrigeration systems in the world. Also, the head of the Engineering and Construction Bureau, Dr. Hasanain Muhammed and Dr. Ahmed Abd and Dr. Taleb Keshash gave scientific lectures. Also, the seminar was attended by number of international companies specialized in cooling and refrigeration and participated in the seminar.

Mechanical Engineering Department Opens the Eighth Engineering Seminar

Mechanical Engineering Department Opens the Eighth Engineering Seminar

Entitled:

“Mechanical Design projects a Step for a better future”

 Under the care of the president of the university Prof. Dr. Amin Daway thamir the general mechanics Branch held the Eighth engineering seminar for design projects for the department. The seminar was held at Dr. Jawameer Hall at 9:30 AM Sunday 12/4/2015. The seminar started with the national anthem and recitement of verses of the Holy Quran and Surat Alfatiha for the souls of Iraq martyrs. then the university president gave the opening speech followed by the speech of the head of the department Prof. Dr. Moyed Razooki Hasan. Later, the head of the general mechanics branch prof. Dr. Sadeq Jaafer gave a speech emphasizing the goals of the seminar of providing the chance to exhibit the design achievements of the branch students and enrich it scientifically by the scientific discussion between faculty and students and the scientific participations of some branch faculty. At the end of the seminar the participants were awarded.

Design Projects for General Mechanics Branch

No.

Name of Project

Name of Students

1

Development of dry cleaning system for turbocharger washing

Hamzah Majed Jaafer

Aws Dhiaa Hasan

2

Design of a mechanism for removing floating garbage from water surfaces

Ibrahem Barakat

Ahmed Faris

3

Improvement of power steering mechanism for hot weather

Loay Jassim

Husham Amer

4

Usage of wasted energies in gyms and convert them to useful energies

Ibrahem Emad

Baqir Jabbar

5

Design of play stations for handicapped

Hayder Ahmed

Ehab Saad

6

Design of a control device for upper limbs amputee

Barraq Falah

Ali Ebrahem

Under the care of the president of the University of Technology Prof. Dr. Amin Daway Thamir and under the supervision of Dr. Moyed Razooki, Mechanical Engineering Department head and under the title “All of us the Iraqi Army, all of us People Crowd

he faculty and students of Mechanical Engineering Department in University of Technology a supportive standup for the Iraqi army and the people crowd in front of the main building of the Mechanical Engineering Department, 10:00 AM Tuesday, 14 April 2015. The Iraqi flag was raised and some supportive posters for the Iraqi Army, while the professors and students signed a huge document to support who sacrificed themselves for Iraq. The document was sent to battle fields.

 Automotive Branch held a student engineering seminar entitled

“Diagnosis of Gasoline Internal Combustion Engine Problems”

Under the Care of the President of the University of Technology Prof. Dr. Amin Daway Thamir, the Mechanical Engineering Department/ Automotive Branch held a Student Engineering Seminar entitled:

“Diagnosis of Gasoline Internal Combustion Engine Problems”

At Dr. Muneer Almothafar Hall at 9:00 PM Tuesday 7/4/2014. The seminar started with the Iraqi National Anthem and verses of the Holy Quran and Surat Alfatiha for Iraqi martyrs. After that the president of the university gave the opening speech followed by the speech of the head of the automotive branch Dr. Muhsen Noori Hamzah clarifying the goals of the seminar on emphasizing the latest technologies in diesel engines to identify the malfunctions of engines and finding the scientific and engineering solutions for it. After that engineer Abdullah Sameer Fadhil, Caterpillar company representative, gave a lecture entitled: “Diagnosis of Internal  Combustion Engine Problems “. Then the students were allowed to discuss and ask questions about the lecture subject, followed by the seminar closure. Finally, the university sign plate was awarded to engineer Ahmed Hamad, manager of maintenance department for caterpillar and an acknowledgement letter for both engineer Abdullah Sameer the manager of the technical library in the company and engineer Mustafa Fadhil the sales manager of the company.

Mechanical Engineering Department / Aircraft Engineering branch held their engineering student seminar

Under the attention of the president of the University of Technology Prof. Dr. Amin Daway Thamir, the Mechanical Engineering Department / Aircraft Engineering branch held their engineering student seminar entitled: (The New Trends in Aircraft Engineering) at the Dr. Muneer Hall,  on Thursday 2/4/2015 at9:00AM . The seminar started with the national anthem and some verses of the Holy Quran and reciting of Surat Alfatiha for the martyrs or Iraq. After that, the president of the university gave a short speech followed by the speech of the head of Aircraft Engineering Branch Professor Dr. Arkan Khilkhal Al Taie, emphasizing on the latest technologies in aircraft systems and design. Later, Dr. Emad Natiq gave a speech about the new technologies in aircraft stability, followed by a lecture by student Khuther Abdul Ameer about design and dynamic analysis of a Quad Copter. Another lecture was then given by Eng. Saad Abbas Hussein about the dynamic simulation of aircraft guidance using Labview. Eng. Ahmed Tawfeeq gave a speech titled (opportunities in Aircraft field). The last lecturer was student Saif Saleh entitled: (The Simulation of an Aircraft Using SolidWorks and ANSYS). At the end of the seminar letters of appreciation were awarded.

 Mechanical Engineering Department / Automotive branch held their engineering student seminar

Under the attention of the president of the university of technology Prof. Dr. Amin Daway Thamir, the Mechanical Engineering Department / Automotive branch held their engineering student seminar entitled: the new technologies in Diesel Engines at the Dr. Muneer Hall  on Wednesday 1/4/2015 at 9:00AM. The seminar started with the national anthem and some verses of the holy Quran and reciting alfatiha for Iraqi martyrs. After that, the president of the university gave a short speech followed by the speech of the head of automotive Eng. branch Dr. Muhsen Noori, emphasizing on the latest technologies in diesel engines to improve its performance with respect to increasing the power and efficiency besides reducing the exhaust polutions. Later, engineer Ali Zaini Hussien, the representative of MAN , the German truck company gave a speech about the new technologies in diesel engines. Finally, Dr. Haider Abid Dhahad, manager of Training and workshop center, gave a speech about the variable combustion phases in diesel engines. The seminar was concluded by awarding letters of appreciation.

Participation of the mechanical engineering department in the scientific products fair on the university ground

The department of mechanical engineering participated in the scientific products fair that was helded at the fortieth year for university establishment. The fair was opened by the president of the university Prof Dr. Amin Daway Thamir at 9:30 AM Monday 13th of April. Also, Mr. Bahaa Alaraji, deputy of Prime Minister and Dr. Foad Qasim, deputy of the Ministry of higher dedication for scientific research and the department head, Dr. Moyed Razoki Hasan. The department participation in the fair by several patents for department faculty members and some graduation projects for undergraduate students.

Participating Projects

No.

Name of Project

Name of Researcher

1

Patent:” A new method for friction point welding using back filler and rotating pressure rod

Dr. Hatem Mouhammad Mahmood, Prof. Dr. Shaker Sekran Hasan, Prof. Dr. Muneer Hameed Telfaieh

2

Patent:” Double Axial planar tests”

Dr. Yasir Yarob Qahtan, Prof. Dr. Shaker Sekran Hasan, Prof. Dr. Mohsen Jebr Jewaiej

3

Patent:” Artificial Foot for amputee”

Dr. Ammar Saleem, Prof. Dr.  Shaker Sekran, Prof. Dr. Mohsen Jebr.

4

Patent:” A new device for sport and operating low power  machines”

Asst. Lecturer Sheymaa Hillal, Anwer Subhi, Taha Ali Jebr

5

Graduation Project” A Device to control Driving Wheel for upper limbs amputee”

Barraq Felah , Khaleel Ali Ibrahem

6

Graduation Project”  Removal of floating garbage on water surfaces”

Ibrahem Barakat, Ahmed Firas

7

Graduation Project” Design of Wind turbine with vertical axis with magnetic discs generator

Ali Qais Mouhammed, Kemal Ahmed Shehab

8

“Design and analysis of solar water pump”

Ali Najeh Mahdi

9

“Quad Copter Analysis and Design”

Khuthur Abdul Ameer, Salah Mahdi Mosa, Rafal Hameed

10

“Design of Helicopter using SolidWorks and Ansys”

Saif Saleh Khaleel

11

“Desgin of Safety Belt that alarms the driver to the danger of sleepiness during driving”

Salam Hussein Ali, Haneen Salam Abbas

Launching of a Quadcopter Prototype Made by Mechanical Engineering Department

The students of aircraft section / mechanical engineering department launched a quadcopter in the sky of the University of Technology. The quadcopter is one of many graduation projects completed by the aircraft students. The flight was a attended by Dr. Moyed Razooki, head of the department, Prof Dr. Arkan Altaie , head of aircraft engineering Dr. Falah Fakjir, deputy head of the department , Dr. Emad Natiq, lecturer Raad shihab, the supervisor s and many other members of staff and interested students.

Honoring One of the Department Employees on Mother’s Day

Under the guidance of the president of the University of Technology, Dr. Amin Daway Thamir, a ceremony to honor Mother’s Day was held. The president of the university gave a speech about this event and praised the role of women in the society, also, many mothers were awarded in this ceremony, including Enam Sabri Humadi, one of the Mechanical Engineering Department employees. The vice president of university for administrative affairs, department heads and several university employees attended the ceremony. At the end of the ceremony, the president thanked all the attendees and everyone who made the ceremony successful.

Students Graduation Day of the Mechanical Engineering Department

The mechanical engineering department held a graduation party (Henna). The graduates insisted to show their support for the Iraqi army and the people crowd.

The students decided to create a huge surprise for everyone by making an Iraqi flag from colored balloons. The flag was made of 17000 balloon. This was an extraordinary event in the Iraqi universities.

The flag is one of the methods that mechanical engineering students use to show their support to the Iraqi army and the people crowd for defeating terrorism in our beloved country.

The students continued to prepare for the celebration after study hours. The decorations were finalized at Wednesday 10:00 PM. Moreover, a huge Iraqi tank was made of balloons, colored with the colors of the Iraqi flag, which represents victory on terrorism. The students also drew some 3D paintings on the ground.

At the celebration, the students wore colorful traditional Iraqi clothes which represents all Iraqi ethnic groups.

Thesis Defense For Omar Yousif Egayel

According to the recommendation of the postgraduate study committee and the certification of the department meeting on 12/1/2015, it was decided to create the following thesis defense committee for the MS student (Omar Yousif Egayel), specialized in Applied Mechanics, for his thesis:

(Effect Of The Friction Force In The Robotic Mechanism Joints On The Dynamic Analysis)

No.

Name

Title

Specialization

Place of Work

 

1

Dr. Ahmed Abdul Hussein Ali

Assistant Professor

Applied Mechanics

Robotics

University of Baghdad, Mechanical Engineering Department

Head

2

Dr. Mohsen Noori Hamza

Assistant professor

Applied Mechanics

Stress Analysis

University of Technology, Mechanical Engineering Department

Member

3

Dr. Qassim Abbas Attiya

Lecturer

Applied Mechanics

Vibrations

University of Technology, Mechanical Engineering Department

Member

4

Dr. Hasan Mouhammed Alwan

Lecturer

Applied Mechanics

Robotics

University of Technology, Mechanical Engineering Department

Adviser

  The plagiarism proofing was made and according to the plagiarism committee report on 15/3/2015. The language adviser is Dr. Arkan Khilkhal Hussein. The date of the defense is Wednesday, 22/4/2015 9:00 AM at Dr. Jawameer Hall in Mechanical Engineering Department.

University of Technology Awards 75 Woman Employee in the International Woman Day and the President of the University acknowledges the Iraqi woman and Role in the University 
The University of Technology celebrated the international woman day on the university theater on 9/3/2015 to emphasize the role of the Iraqi woman in the society. Attendees included Dr. Ameen Daway Thamir the president of the university and Dr. Wisam Kadhim Hamdan the vice president for scientific affairs and Dr. Sami abu Alnoon the Vice president for administration affairs and Kawkab AlAttar the manager of the Iraqi woman organization and Hassan Alkhafaji the president of the elite and professionals society, besides number of the department heads and faculty members.

The Prime Minister Visit to the University of Technology

The prime minister of Iraq, Dr. Hayder Al Abadi, visited the University of Technology and gave a speech about the achievements accomplished by the Iraqi armed forces, people crowd and sons of tribes in defeating terrorism. The minister of higher education and scientific research was present, besides the university president, department heads and students to support our armed forces and people crowd. At the end of the ceremony, the university president thanked the prime minister for visiting and everyone who participated in making this celebration successful.

University President Opens Fuel Lab in

Mechanical Engineering Department

University president, Prof. Dr. Amin Daway Thamir, announced the opening of the fuel lab in Mechanical Engineering Department on 22/12/2014. The department head, Dr. Moayed Hasan welcomed him with several faculty members. The lab engineers offered valuable explanation and answered questions about the lab and how devices work.

A Faculty Member Publishes a Book in an International Publishing Company

Dr. Sadeq Hussein Bakhi published his book (Prosthetic Robotic Hand) in Lambert Academic Publishing.

Thesis Defense Date for MS Student: Safaa Abdul Wahid Ghadhban

According to the recommendation of the graduates study committee and the certification of the department meeting on 12/1/2015, it was decided to create the following thesis defense committee for the PH.D student (Safaa Abdul Wahid Ghadhban), specialized in Thermofluids, for his dissertation:

Numerical and Experimental Investigation Of Hydraulic Poppet Valve System 

No.

Name

Title

Specialization

Place of Work

 

1

Dr.Jaafer Mahdi Hasan

Professor

Hydraulics

University of Technology, Mechanical Engineering Department

Head

2

Dr. Waheed Shaty Mouhammed

Professor

Air Conditioning

University of Technology, Mechanical Engineering Department

Member

3

Dr. Ali Abd Almohsen Alasady

Assistant professor

Hydraulics

University of Baghdad, mechanical engineering department

Member

4

Dr. Rafe’e Abbass Hasan

Assistant Professor

Energy Generation

University of Almustansiriya, mechanical engineering department

Member

5

Dr. Majid Elewi Ahmed

Assistant Professor

Power plants

University of Technology, Control Engineering Department

Member

6

Dr. Jalal Mouhammed Jaleel

Professor

Heat transfer

University of Technology, Electromechanical Engineering Department

Adviser

7

Dr. Sabah Tareq Ahmed

Professor

Solar Energy

University of Technology, Mechanical Engineering Department

Adviser

 The plagiarism proofing was made and according to the plagiarism committee on 24/12/2014. The language adviser is Dr. Sameer Ali Amin. The date of the defense is Thursday, 26/3/2015 9:00 AM at Dr. Jawameer Hall in Mechanical Engineering Department.

Thesis Defense Date for MS Student: Wisam Hameed Elewi

According to the recommendation of the graduates study committee and the certification of the department meeting on 12/1/2015, it was decided to create the following thesis defense committee for the PH.D student (Wisam Hameed Elewi), specialized in Thermofluids, for his dissertation:

Systematic Solution Methodologies For The Fluid Flow Manifold Problem For Water Pumping Station

No.

Name

Title

Specialization

Place of Work

 

1

Dr. Asem Hameed Yousif

Professor

Turbomachinary

University of Technology, Mechanical Engineering Department

Head

2

Dr.Arkan Khilkhal Hussein

Professor

Aircraft Engines

University of Technology, Mechanical Engineering Department

Member

3

Dr. Qasim Saleh Mehdi

professor

Energy

University of Almostansirya, Mechanical Engineering Department

Member

4

Dr. Hussein Yousif Mahmood

Professor

Energy Generation

University of Baghdad, College of Engineering

Member

5

Dr. Ekhlase Mouhammed Fayyed

Assistant Professor

Fluid Mechanics

University of Technology, Mechanical Engineering Department

Member

6

Dr. Jaafer Mehdi Hasan

Professor

Hyrolics

University of Technology, Mechanical Engineering Department

Adviser

7

Dr. Waheed Shati Mouhammed

Professor

Heat transfer

University of Technology, Mechanical Engineering Department

Adviser

 The plagiarism proofing was made and according to the plagiarism committee on 24/12/2014. The language adviser is Dr. Ayad Jehad Shamsuldeen. The date of the defense is Thursday, 19/3/2015 9:00 AM at Dr. Jawameer Hall in Mechanical Engineering Department.

Seminar By Dr. Ikhlase M. Fayyed

A seminar was held in the Mechanical Engineering Department at Dr. Jawameer Hall on Monday 24\11\2014. Seminar entitled:
FLOW BOILING OF R134a IN MULTI MICRO-CHANNELS
The research was held in Brunel University, UK – University of Technology, Iraq.

Several faculty members from Mechanical Engineering Department attended the seminar.

Seminars for graduate students

The mechanical engineering department has held several seminars for graduate students (Master’s and PhD’s):

 

1

Ibrahim Musa Hasan

PhD. Applied mechanics

17/11/2014

2

Hatem Mohammed Mahmood

PhD. Applied mechanics

17/11/2014

3

Mamoon Ali Ahmed

PhD. Applied mechanics

17/11/2014

4

Mohammed Ismael Elewi

PhD. Thermo fluids

19/11/2014

5

Omar Faris Abdullah

MS / Air Conditioning

19/11/2014

6

Mohammed Aziz Hasan

MS / Air Conditioning

19/11/2014

7

Eman Shakir Hussein

MS/ Power Generation

19/11/2014

Thesis Defense Date for MS Student: Salah Haji Abd Own

According to the recommendation of the graduates study committee and the certification of the department meeting on 7/12/2014, it was decided to create the following thesis defense committee for the PH.D student (Kadhim Oda Jahaf), specialized in applied thermofluids, for his dissertation:

Applications of Using Nanifluids for Cooling Blood Mimic Fluids

No.

Name

Title

Specialization

Place of Work

 

1

Dr. Ehsan Yahya Hussein

Professor

Heat Transfer

University of Baghdad, College of Engineering

Head

2

Dr. Kareema Esmael Ammory

Professor

Heat transfer

University of Baghdad, College of Engineering

Member

3

Dr. Talib Keshash Murtada

Assistant professor

Air Conditioning

University of Technology, Mechanical Engineering Department

Member

4

Dr. Ekhlas Mouhammed Fayyed

Assistant Professor

Fluid mechanics

University of Technology, Mechanical Engineering Department

Member

5

Dr. Qusay Jehad Abd Alghafoor

Assistant Professor

Solar Energy

University of Technology, Mechanical Engineering Department

Member

6

Dr. Abd Alhasan Karamallah

Professor

Heat flow

University of Technology, Mechanical Engineering Department

Adviser

The plagiarism proofing was made and according to the plagiarism committee on 24/12/2014. The language adviser is Dr. Arkan Khilkhal Hussein. The date of the defense is Thursday, 19/2/2015 9:00 AM at Dr. Jawameer Hall in Mechanical Engineering Department.

 

Thesis Defense Date for MS Student: Kadhim Oda Jahaf

According to the recommendation of the graduates study committee and the certification of the department meeting on 7/12/2014, it was decided to create the following thesis defense committee for the PH.D student (Kadhim Oda Jahaf), specialized in applied thermofluids, for his dissertation:

Applications of Using Nanifluids for Cooling Blood Mimic Fluids

No.

Name

Title

Specialization

Place of Work

 

1

Dr. Ehsan Yahya Hussein

Professor

Heat Transfer

University of Baghdad, College of Engineering

Head

2

Dr. Kareema Esmael Ammory

Professor

Heat transfer

University of Baghdad, College of Engineering

Member

3

Dr. Talib Keshash Murtada

Assistant professor

Air Conditioning

University of Technology, Mechanical Engineering Department

Member

4

Dr. Ekhlas Mouhammed Fayyed

Assistant Professor

Fluid mechanics

University of Technology, Mechanical Engineering Department

Member

5

Dr. Qusay Jehad Abd Alghafoor

Assistant Professor

Solar Energy

University of Technology, Mechanical Engineering Department

Member

6

Dr. Abd Alhasan Karamallah

Professor

Heat flow

University of Technology, Mechanical Engineering Department

Adviser

The plagiarism proofing was made and according to the plagiarism committee on 24/12/2014. The language adviser is Dr. Arkan Khilkhal Hussein. The date of the defense is Thursday, 19/2/2015 9:00 AM at Dr. Jawameer Hall in Mechanical Engineering Department.

 

Thesis Defense Date for MS Student: Baidaa Khaleel Khudair

According the recommendation of the higher education committee and departmental approval on 7/12/2014, a committee was established for the thesis defense for MS student (Baidaa Khaleel Khudair) to defend her thesis entitled:

Natural Convection Heat Transfer in an Enclosed Vibration Cavity

The committee included the following faculty members:  

No

Name

Position

Specialization

Organization

 

1

Dr. Kefah Hamid Helal

Assistant Professor

Thermofluids

Technology Institute, Mechanical department

Head

2

Dr. Ahmed Abd Mouhammed

Assistant Professor

Air Conditioning and Refrigeration

University of Technology, Mechanical Engineering Department

Member

3

Dr. Wafaa Abd Suood

Lecturer

Thermofluids

University of Baghdad, College of Engineering, Mechanical Engineering Department

Member

4

Dr. Adel Mahmood Salih

Assistant Professor

Thermofluids

University of Technology, Mechanical Engineering Department

Adviser

5

Dr. Kays A. Al-Taey

Assistant Professor

Thermofluids

University of Technology, Mechanical Engineering Department

Adviser

The linguistic adviser is Dr. Sameer Ali Ameen. The date of defense is Thursday 29/1/2015 9:00 AM at Dr. Jawameer Hall in Mechanical Engineering Department.

 

Thesis Defense Date for MS Student: Walaa Musa Hashim

According the recommendation of the higher education committee and departmental approval on 7/12/2014, a committee was established for the dissertation defense for Ph.D. student (Walaa Musa Hashim) to defend his dissertation entitled:

Energy Saving in the Pneumatic Actuation Using Prediction Model by Physical Law

The committee included the following faculty members:  

No

Name

Position

Specialization

Organization

 

1

Dr. Najdat Nashaat Abdullah

Professor

Thermofluids

University of Baghdad, College of Engineering, Mechanical Engineering Department

Head

2

Dr. Amer Majeed Hameed Aldabagh

Assistant Professor

Heat Transfer

University of Technology, Mechanical Engineering Department

Member

3

Dr. Ali abdul Mohsen Al Asady

Assistant Professor

Thermofluids

University of Baghdad, College of Engineering, Mechanical Engineering Department

Member

4

Dr. Emad Nateq Abdul Wahab

Assistant Professor

Control Engineering

University of Technology, Mechanical Engineering Department

Member

5

Dr. Mouhammed Jassim Mouhammed

Assistant Professor

Control Engineering

University of Technology, Control and Systems Engineering Department

Member

6

Dr. Jaafer Mahdi Hasan Assistant Hydraulic Systems University of Technology, Mechanical Engineering Department Member

7

Dr. Majid Ahmed Elewi Assistant Professor Control Engineering University of Technology, Control and Systems Engineering Department Adviser

The linguistic adviser is Dr. Arkan Khilkhal Husein. The date of defense is Monday 26/1/2015 9:00 AM at Dr. Jawameer Hall in Mechanical Engineering Department.

 

Thesis Defense Date for MS Student: Ali Hussein Alwan

According to the recommendation of the graduate study committee and department approval on 7/12/2014 the following thesis defense committee has been formed for the Master’s Student Ali Hussein Alwan, Applied Mechanics, for the thesis entitled:

 Experimental and Simulation Study of the Effect of Different Reduction Ratios in Cold Forming of Sheet Metals 

Below are the committee members:

No

Name

Position

Specialization

Organization

 

1

Dr. Ibtihal Abdul Razzak Mahmood

Assistant Professor

Engineering Materials

University of Technology, Mechanical Engineering Department

Head of Committee

2

Dr. Ali Hussein Mohammed

Assistant Professor

Applied Mechanics

Al Nahrain University, College of Engineering, Mechanical Engineering Department

Member

3

Dr. Hasan Mouhammed Alwan

Lecturer

Applied Mechanics

University of Technology, Mechanical Engineering Department

Member

4

Dr. Sameer Ali Amin

Assistant Professor

Metals Engineering

University of Technology, Mechanical Engineering Department

Thesis Adviser

5

Dr. Sadeq Jaafer Aziz

Lecturer

Combustion

University of Technology, Mechanical Engineering Department

Thesis Adviser

Knowing that the language adviser is Dr. Arkan Khilkhal Hussein and the thesis defense will be held on Thursday 21/1/2015 9:00 AM at Dr. Jawameer Hall in Mechanical Engineering Department.

Thesis Defense Date for MS Student:Thamer Amoori Hashim

According to the recommendation of the graduates study committee and the certification of the department meeting on 7/12/2014, it was decided to create the following thesis defense committee for the MS student (Thamer Amoori Hashim), specialized in Applied Mechanics, for his thesis:

Compressive Residual Stresses on the Notch Sensitivity Factor of Different Material

No.

Name

Title

Specialization

Place of Work

 

1

Dr. Shaker Sakran Hasan

Professor

Applied Mechanics

University of Technology, Mechanical Engineering Department

Head

2

Dr. Fadhil Abbas Abdullah

Assistant professor

Applied Mechanics

University of Almostansiriya, College of Engineering

Member

3

Dr. Hussein Mouhammad Hussein

Lecturer

Applied Mechanics

University of Technology, Mechanical Engineering Department

Member

4

Dr. Ahmed Nayyef Ebrahim

Assistant Professor

Applied Mechanics

University of Technology, Mechanical Engineering Department

Adviser

 The language adviser is Dr. Sameer Ali Amin. The date of the defense is Sunday, 25/1/2015 9:00 AM at Dr. Jawameer Hall in Mechanical Engineering Department.

 

Thesis Defense Date for MS Student: Ammar Saleem Hameed

According to the recommendation of the graduates study committee and the certification of the department meeting on 7/12/2014, it was decided to create the following thesis defense committee for the PH.D student (Ammar Saleem Hameed), specialized in applied mechanics, for his dissertation:

Design and Analysis of Athletic Limb for Special Need

No.

Name

Title

Specialization

Place of Work

 

1

Dr. Somer Metty Dawood

Professor

Applied Mechanics

University of Baghdad, College of Alkhawarizmy

Head

2

Dr. Mowafaq Ali Tawfeeq

Assistant Professor

Vibrations

University of Technology, Mechanical Engineering Department

Member

3

Dr. Wathiq Essa Mahdi

Assistant professor

Applied Mechanics

University of Technology, Control Engineering Department

Member

4

Dr. Kadhim Kamil Resan

Assistant Professor

Applied Mechanics

University of Almostansirya, Mechanical Engineering Department

Member

5

Dr. Nabeel Noor Sawady

Assistant Professor

Applied Mechanics

University of Technology, Mechanical Engineering Department

Member

6

Dr. Mohsen Gabar Jawaeg

Professor

Applied Mechanics

University of Al-Nahrain College of Engineering

Adviser

7

Dr. Shaker Sakran Hasan

Professor

Applied Mechanics

University of Technology, Mechanical Engineering Department

Adviser

The language adviser is Dr. Sameer Ali Amin. The date of the defense is Tuesday, 20/1/2015 9:00 AM at Dr. Jawameer Hall in Mechanical Engineering Department.