Research Published in Scientific International Journals

Back
Research Published in Scientific International Journals 
Research Title The Name of the Researcher Journal  Vol., Issue Year Impact Factor Abstract
01 mixed-mode I/III fracture toughness of polymer matrix composites toughened with waste particles Mohamad Alsaadi De Gruyter / Sci Eng Compos Mater 2017   Abstract
Ahmet Erkliğ  
Mehmet Bulut
02 Pathology behavior of different binary Polymer blends and blends composites against bacteria Dr. Ahmed M.H. Abdulkadhim Al-Ghaban ADVANCES in NATURAL and APPLIED SCIENCES 2016   Abstract
Dr. Sihama E. Salih
Dr. Alyaa H. Abd Alsalam
Azhar Jabbar
03 Effect of NanoZrO2 Addition on the Structural and Mechanical Properties of TiC Dr. Ahmed M.H. Abdulkadhim Al-Ghaban ADVANCES in NATURAL and APPLIED SCIENCES 2016   Abstract
Dr. Kadhum Mutter Shabeeb
Aseel Hadi Hamaza
04 Synthesis and Characterization of TiC-Al2O3 Nanoparticles Dr. Ahmed M.H. Abdulkadhim Al-Ghaban ADVANCES in NATURAL and APPLIED SCIENCES 2016   Abstract
Dr. Kadhum Mutter Shabeeb
Aseel Hadi Hamaza
05 Biomechanics of Natural Fiber Green Composites as Internal Bone Plate Grafted Ahmed M. Hashim International for Chimstry & Phy. 2016   Abstract
E.K. Tanner
Dr. Jawad K. Oleiwi
06 A comparative study on industrial waste fillers affecting mechanical properties of polymer-matrix composites Ahmet Erkliğ Materials Research Express 2016   Abstract
 Mohamad Alsaadi
Mehmet Bulut
07

Simulate and Study the Effect of Compton Scattering Angle on the Radiography Inspection

 Dr. Iman T. Al-Alawy International for Chimstry & Phy. 2016   Abstract
Dr. Alaa B. kadhum
Dr.Sura S. Ahmed
08 Study of Corrosion Behavior of Al-Si-Cu/WC Composites in 0.1 N NaOH Solution Dr .Rana A. Majeed JKAU: Eng. Sci 2016   Abstract
09 Effect Of Tellurium Addition On Thermo-Mechanical Characterization And Shape Memory Properties For Cu-Al-Ni Shape Memory Alloys Muna Khethier Abbass International Journal of Advances in Science, Engineering and Technology(IJASEAT) 2016   Abstract
Munther Mohamed Radhy
Raad Suhail Ahmed Adnan
10 Behavior of Ti/HA in Saliva at Different Temperatures as Restorative Materials Dr .Rana A. Majeed Bio- and Tribo- corrosion 2016   Abstract
11 Sumac (Rhus) Extract as Green Inhibitor for Steel in Seawater Dr .Rana A. Majeed

IJSRSET

2016   Abstract

Hiba Anwer Abdulahh

Mohammed Ali Tareq

12 microhardness and compressive strength of functionally graded Ti/HA biomaterials Dr. Jawad K. Oleiwi International Journal 2015 0.278 Abstract
13 Correlating Capacity and Li Content in Layered Material for Li-ion Battery Using XRD and Particle size Distribution Measurements A.A.A. Al-tabbakh Indian J. Physc. 2015   Abstract
Dr. Aseel B. Al-Zubaidi
N. Kamarulzaman
14 The impact element tantalum and niobium on the erosive behavior of the nickel-titanium alloy Dr. Emad S. Abdulkareem Wulfenia 2015 1.31 Abstract
15 correlations for nusselt number in free convection from an isothermal inclined square plate by a numerical simulation Dr. Ayad K. Hasan International Journal 2015   Abstract
16 Fabrication, characterization and physical prosperities of functionally Graded Ti/HAP bioimplants Dr. Jawad K. Oleiwi Wulfenia 2015 1.31 Abstract
Dr .Rana A. Majeed
Sura Abdulzahra
17 Corrosion Behavior of Amalgam/Cockles Shells Composites in Artificial Saliva Dr. Aseel Basim Al-Zubaidi INTERNATIONAL JOURNAL OF ENGINEERING SCIENCES & RESEARCH TECHNOLOGY 2015 2.114 Abstract
Dr. Ahmed Abdul Rahman
Dr .Rana A. Majeed
18 Thermally Treated Rice Husk Ash for Cement Replacement Dr. Aseel Basim Al-Zubaidi International Journal of Innovative Research in Advanced Engineering

Issue 1, Volume 2

 2015   Abstract
19 MECHANICAL BEHAVIOR OF NATURAL MATERIAL (ORANGE PEEL) REINFORCED POLYESTER COMPOSITE Raghad U. Abass INTERNATIONAL JOURNAL OF ENGINEERING SCIENCES & RESEARCH TECHNOLOGY 2015 2.114 Abstract
20 Effect of Addition Bio Filler (|Beans Shell powder) Reinforcement By Polyester Composites Dr. Aseel B. Abdul Hussain International Journal of Scientific & Engineering Research, Volume 6, Issue 2 2015   Abstract
Falak U. Abass
Raghad U. Abass
21 Improvement of Mechanical Properties of Polyester Composite Reinforced By Bio Filler (Acro Shell) Raghad U. Abass International Journal of Innovative Science, Engineering & Technology, Vol. 2 Issue 3 2015   Abstract
22 Study Mechanical Behaviors Rice husk ash and carrot powders as Mortar for Cement Replacement Dr. Aseel B. Abdul Hussain International Journal of Innovative Science, Engineering & Technology, Vol. 2 Issue 3 2015   Abstract
Dr. Ahmed Abdul Rahman
Raghad U. Abass
23 Corrosion Inhibition by Pumpkin Peels Extract in Petroleum Environment Dr .Rana A. Majeed American Chemical Science Journal, Vol.5, Issue 1, 2015, P. 32-40 2014 31 Abstract
24 TerraGreen 13 International Conference 2013 - Advancements in Renewable Energy
and Clean Environment Bi2-xHgxSr2-yBayCa2Cu2O10 / Ag Sheath HTSC Wires, (Hg, Ba) Substitution Effect on The Critical Temperature		 Dr. Akram R. Jabr ScienceDirect Energy Procedia 36 ( 2013 )985-994 2014   Abstract
25 Corrosion Behavior of V2AlC and Cr2AlC MAX Phase Materials in 0.01N NaCl Dr .Rana A. Majeed Asian Journal of Engineering and Technology, Vol.2, Issue 3, P.244-253 2014   Abstract
Dr. Ahmed M.H. Abdulkadhim Al-Ghaban
Rosul Fadhil
26 Corrosion Inhibition of Steel in Petroleum Medium by Ficus Carica Extract Dr .Rana A. Majeed Asian Journal of Engineering and Technology, Vol.2, Issue 3,  P. 235-243 2014   Abstract
Dr. Mohammed A. Hussein
Hiba Anwar
27 Thermodynamic and Kinetic Study for Corrosion of Al-Si-Cu/Y2O3 Composites Dr .Rana A. Majeed Asian Journal of Chemistry, Vol.26, Issue 14, P.4469-4474 2014 0.266 Abstract
28 Improvement the Corrosion Resistance of Pure Al, Al-Si and Al-Zn Alloys by Nanoalumina Coating Dr .Rana A. Majeed International Journal Innovative Science, Engineering and Technology, Vol.1, Issue 4, P.494-505 2014 0.611 Abstract
29 Evaluation the Inhibition of Steel in Petroleum Medium by Tobacco Leaves Extract Dr .Rana A. Majeed International Journal of Innovative Research in Science & Engineering, Vol.2, Issue 7, P.484-492 2014 0.665 Abstract
Dr. Mohammed A. Hussein
Hiba Anwar
30 Corrosion Inhibition by Natural Extracts at 50oC Dr .Rana A. Majeed International Journal of Engineering Sciences & Research Technology, Vol.3, Issue 7, P. 642-652 2014 3.449 Abstract
Hiba Anwar
31 Study of Suspended Solution from Blending Three Polymer Metal Complexes as Antimicrobial Dr. Basam A. kalil Journal of Chemical and Process Engineering Research Vol:21 2014   Abstract
32 Synthesis and Characterization of New Schiff Base Derived from PVA and Erythroascorbic Acid Derivative and Study Its Effect on the Activity Ach Enzyme (In Vitro) Dr. Basam A. kalil Chemistry and Materials Research No:2,Vol:6 2014   Abstract
33 Synthesis, Characterization and Antimicrobil Investigations of (Ag,Cu,Ni,Co,Mn & Hg) Complexes with Schiff Case Derived from PVA and Erythro-Ascorbic and Derivative Dr. Basam A. kalil Journal of natural Sciences Research No:4,Vol:4 2014   Abstract
34 Sodium Silicate and Phosphate as Corrosion Inhibitors for Mild Steel in Simulated Cooling Water System Dr .Rana A. Majeed The Arabian Journal for Science and Engineering, Springer, Vol.38, No.12 2013 0.385 Abstract
35 On The Spot Brazing and Spot Soldering of  Tantalum Dr. Fadhil A. Hashim Natural and Applied Science 2013   Abstract
36 MODELING OF OXIDATION KINETICS IN AIR OF STEEL-T21 ALLOY COATED BY SIMULTANEOUS GERMANIUM-DOPED ALUMINIZING-SILICONIZING PROCESS BY MULTIPLE LINEAR REGRESSION USING MATLAB Dr. Abbas K. Husain international J.of Multidispl.Reasearch& AdvancsinEngg.(lJMRIA) NO:1,VOL:6 2013   Abstract
37 Finite Element Analysis Using Matlab of Oxidation Kinetics inAir of Steel-T21 Alloy Coated by Simultaneous Germanium-Doped Aluminizing Process Dr. Laith Kais Abbas international J.of Eng.Research& Ind.App (IJERA) NO:2 VOL:6 2013   Abstract
Dr. Emad S. Abdulkareem
Dr. Abbas K. Husain
38 SEM-Assisted thermophysical and mechanical properties of sintered Mgo -ZrO2 composite Dr. Fadhil A. Chyad Enegy procedia 2013   Abstract
39 Characterization of Ni-Ti shape memory alloys prepared by powder metallurgy Dr. Emad S. Abdulkareem journal of alloys and compounds NO:578 2013   Abstract
40 MODELLING OF HOT CORROSION RESISTANCE OF INCONEL 718 COATED BY SIMULTANEOUS -YTTRIUMDOPED ALUMINIZING SILICONIZING PROCESS Dr. Abbas K. Husain IJMRAE/ISSN 2013   Abstract
Hashim Sh. Niama
Ammar M. Hasan
41 OPTIMIZATION of ARE METAL WELDING PROCESS OF LOW CARBON STEEL (304) USING TAGUCHI APPROACH Majid H. Abdulmajeed international J.of Engg.Research &Indu.Appls IJERIA NO:2,VOL:6 2013   Abstract
42 Fabrication of Aluminium Nanowires by Differential Pressure InJection Ahmed A. Hashoosh ISRN Nan materials Aarticle:132798,Vol: 2013 2013   Abstract
43 Fabrication and characterization of ultrafine crystalline MgO and ZnO powders Dr. Fadhil A. Chyad International J. of innovative research in science , engineering and technology NO:10,VOL :2 2013   Abstract
44 The effect of magnesia dopant and laser treatment on ZnO ceramics Dr. Fadhil A. Chyad J.of minerals and materials characterization and engineering NO:6,VOL:1 2013   Abstract
45 SEM_Assisted thermophysical and mechanical of sintered magnesia-zirconia composite Dr. Fadhil A. Chyad Elsvier J,of Energy Procedia NO:1,VOL:6 2013   Abstract
46 Phenylenediamine as Inhibitor in Sour Water at Oil Refinery Dr .Rana A. Majeed Int. J. Electrochem. Sci. VOL:8 2013   Abstract
47 corrosion behavior of foodstuffs can in saline solution containing sodium benzoate Dr .Rana A. Majeed Asian Journal of agriculture and food science 2013   Abstract
48 Preparation and study of the properties of magnesium oxide powders and zinc oxide very soft amorphous Dr. Fadhil A. Chyad International J. of Innovative Research in Science, Engineering and  Technology 2013   Abstract
49 Study the effect of addition of magnesia as well as laser treatment on zinc oxide ceramics Dr. Fadhil A. Chyad J.of minerals and materials characterization and Engineering 2013   Abstract
50 Preparation imbricated zirconia-magnesia and study the physical properties, thermal and mechanical by helping of scanning electron microscope Dr. Fadhil A. Chyad Elsevier Energy Procedia 2013   Abstract
51 study of heat transfer coefficients ofa laboratory scale three phaseinverse fluidized bed system Dr. Mohammed H. Hafod international J.of Multidispl. Reasearch & Advancsin Engg . (lJMRIA) 2012   Abstract
Ar. Ali H. Jawad
52 ON THE SPOT BRAZING AND SPOT SOLDERING OF TANTALUM Dr. Fadhil A. Hashim Natural and Applied Science 2012   Abstract
53 Modeling the kinetics of oxidative stress in the air for the T21 steel coated in a manner Ermna Slkna modified Paljrmanyum using multivariate linear model Dr. Abbas K. Husain international J.of Multidispl Reasearch & Advancsin Engg . (lJMRIA) 2012   Abstract
54 synthesis and studying some mechanical properties of nanocmposite Dr. Fadhil A. Chyad jaurnal of alloys and compounds 2012   Abstract
55 Effect of SiO2 on the Mechanical Properties of (AL-Cu-Mg) Alloy Dr. Alaa H. Ali International Conference on "Advances in Manufacturing Technology" - ICAMT2012 2012   Abstract
Hind B. Ali
Mervit M. Hanoos
56 Tensile strength of squeeze cast carbon fiber reinforced aluminum-silicon matrix composites Dr. Kahtan K. AlKhazriji The journal of minerals and materials characterization and engineering Vol.10,No.2 2011   Abstract
Dr. Ahmed A. Mousa
Dr. usama M. Sultan
57 Crystallization kinetics of amorphous Cr2AlC thin films Dr. Ahmed M.H. Abdulkadhim Al-Ghaban ScienceDirect 206 2011   Abstract
58 Spontaneous Formation of In-Whiskers on YIn3 Thin Films Deposited by Combinatorial Magnetron Sputtering Dr. Ahmed M.H. Abdulkadhim Al-Ghaban TRANSACTIONS ON NANOTECHNOLOGY VOL. 10, NO. 5 2011   Abstract
59 MAX phase formation by intercalation upon annealing of TiCx/Al (0.4 x 1) bilayer thin films Dr. Ahmed M.H. Abdulkadhim Al-Ghaban ScienceDirect 59 2011   Abstract
60 Crystallization kinetics of V2AlC Dr. Ahmed M.H. Abdulkadhim Al-Ghaban ScienceDirect 520 2011   Abstract